mud400

Hey all,
I have a set of 2009 Husaberg 18-20mm triples that I am going to sell. Do they fit any KTM's that you know of? Thanks.

suhoi27

AFAIK, 09 Berg has 19mm offset triples-upper being the same as KTM's 18-20mm billet triples. In either way they fit KTM 100%

mud400

You are right. According to the parts book they should be 19's...... Huh. I'll have to look into how we ended up with the 18-20's.

Mark_Donovan

Ahh I'm not crazy! I bought my son set of Orange anodized tripple clamps for his 2010 300XCW and put his Black clamps on my 09 FE570. And decided I would sell my old clamps. I advertised them as 18/20's as that is what they said on the top clamp but someone pointed out to me that the 09 bergs had 19's. But my bike had a 18/20 on top and a non adjustable unrecognized part number on the bottom. Very weird. Mud400 is this what happened to you too? Very weird?
Mark @ SOS

mud400

I don't know. I'll snap some pictures and post them up.... They are a weird part number that is for sure.

mud400

OK, so this IS weird. The are labeled as 18-20's on the top and not the bottom. BUT neither are actually adjustable.....

Huh. SO I guess they are 19's if they came off an 09'.

Here are the part numbers:

top = 594.01.034.018-20
bottom = 780.01.030.319

The bottom clamp part number designates 19mm offset. The top says 18-20mm offset yet the are not adjustable.

suhoi27

yeah, the top clamp is always the same 18-20 or 19 (as for the FE)....the bottom one makes the whole difference-mine were the same!

mud400

On the truly adjustable ones, the hole in the top clamp is an oblong. Depending how the stem is placed it gives you your offset. The hole in mine is round and drilled at a 19mm offset.

Interesting.

Mark_Donovan

I already sold mine, but I do still have pictures, but I don't know how to post them on the new forum?

mud400

OK, Here are some pictures of mine. You can see the part numbers and the fact they are not adjustable....