Husaberg
Go Back   Husaberg Forum > Husaberg Forum > SuperMoto

SuperMoto SuperMoto Forum


Reply
 
LinkBack Thread Tools Display Modes
February 11th, 2009, 09:54 PM   #1
Member
 
Joined: Nov 2008
From:

Posts: 42
Thanks: 0

I Ride:
310mm Steel Discs

Just a bit of a heads up, I know of a few people who have been looking for good priced 310mm beringer steel discs and its hard to pick them up for less than about £150 second hand!! Well DCR Accessories in Preston (England) have had comparable 310mm steel discs made to fit any KTM hub (ie bergs aswell) and are packing them out at £100 NEW!!!

Clicky here ---> http://www.daveclarkeracing.com/prod01132.htm (About half way down the page)

Also, those £35 a set 6pot beringer brake pads?....... £18 a set


Just spotted a good bargain and thought I'd share it with you all

Chris#64 is offline  
 
February 12th, 2009, 05:39 AM   #2
Member
 
Joined: Nov 2008
From:

Posts: 42
Thanks: 0

I Ride:
RE: 310mm Steel Discs

Er, I meant 'cast iron' discs.... sorry
Chris#64 is offline  
February 26th, 2009, 10:50 PM   #3
Member
 
Joined: Jan 2008
From: Stockholm, Sweden

Posts: 40
Thanks: 0

I Ride:
Is it a copy not only in shape, but also in material?
Barrett is offline  
March 16th, 2009, 06:43 AM   #4
Member
 
Joined: Jan 2008
From: Stockholm, Sweden

Posts: 40
Thanks: 0

I Ride:
Anyone tried out the "DCR RADIAL CALIPER BRAKE PADS"? Is they equal to the standard, called ....100, or the one with ...300 in the end of the part nummer? ...or better than both?
Barrett is offline  
March 16th, 2009, 10:57 PM   #5
Member
 
Joined: Nov 2008
From:

Posts: 42
Thanks: 0

I Ride:
Hi Barret, sorry I hadn't answered your original question as I hadn't used them myself properly. However, I went on a test day at a local track about two weeks ago and tried both the DCR 310 disc and the DCR 6 pot brake pads on my 550. Both where exceptional. I have never had any problems with the Beringer setup in the past, and the DCR setup offered the exact same feel and stopping power as the Beringer. I was very impressed, I now have my own stock of pads for the season, and a disc aswell. Top quality breaking power at half the price, I won't complain at that I can tell you
Chris#64 is offline  
Reply

  Husaberg Forum > Husaberg Forum > SuperMoto

Tags
310mm, discs, steel



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Front brake disc 310mm FS userslo Wheels and Tires 13 August 4th, 2012 08:45 AM
Beringer 310mm stockist kerplunkwhoops SuperMoto 3 March 21st, 2010 09:22 PM
310mm Rotors for Berg 6 Piston Caliper and rear wheel size? rbott SuperMoto 2 June 12th, 2009 08:47 PM
little end material: can it be steel? Taffy Mechanical 5 July 26th, 2008 08:41 AM
cam sprocket, steel mars Mechanical 3 October 8th, 2007 05:00 AM


Facebook Twitter Google+ RSS Feed