Husaberg
Go Back   Husaberg Forum > Husaberg Forum > SuperMoto

SuperMoto SuperMoto Forum


Reply
 
LinkBack Thread Tools Display Modes
June 22nd, 2006, 04:47 AM   #1
Junior Member
 
jasper's Avatar
 
Joined: Aug 2006
From:

Posts: 5
Thanks: 0

I Ride:
Will these supermoto KTM wheels fit on my 501 enduro?

Somebody offered me supermotowheels from a 99 KTM LC4:
front 120/70 17" 3,5"-36 18mm diameter
rear:160/70 17" 4,25"-36 20mm diameter

Can somebody advice me if they will fit on my Husaberg enduro501
(1992 jimmi erickson replica)?


thanks+regards from Amsterdam
Jasper
jasper is offline  
 
June 22nd, 2006, 11:45 PM   #2
Senior Member
 
Joined: Apr 2003
From: Newcastle, NSW, Australia

Posts: 1,061
Thanks: 3

I Ride:
Re: Will these supermoto KTM wheels fit on my 501 enduro?

Are you positive the front axle is Ø18mm & not Ø17?

The '98 model berg is definitely Ø17 axle on the front & Ø20 on the rear. I believe the rear was the same on the '95. The front has different forks & the bearings are listed as a different part, so it is possible it has a larger axle.

If the axle diameters are the same as yours you may be able to make them fit but it is likely you will need another front caliper adapter.
BundyBear is offline  
Reply

  Husaberg Forum > Husaberg Forum > SuperMoto

Tags
501, enduro, fit, ktm, supermoto, wheels



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Enduro wheels BelgiqueBasterd Wheels and Tires 7 November 22nd, 2009 06:06 PM
supermoto to enduro, just wheels?? ian748 Suspension 7 September 21st, 2006 11:10 AM
Fitting enduro wheels to a FS650e dcp Husaberg 6 March 10th, 2006 02:37 AM
Supermoto wheels [again] Semtexsam SuperMoto 5 October 3rd, 2004 12:36 PM
Supermoto wheels Semtexsam Husaberg 3 May 12th, 2004 03:08 PM


Facebook Twitter Google+ RSS Feed