Go Back   Husaberg Forum > Husaberg Forum > SuperMoto

SuperMoto SuperMoto Forum

LinkBack Thread Tools Display Modes
December 1st, 2018, 10:42 PM   #1
Joined: May 2014
From: new zealand

Posts: 36
Thanks: 3

I Ride: FS650e
Fs 650 front brake master cylinder rebuild

Hi all,

Has anyone done a rebuild on the master cylinder on the FS, separate fluid resivouir.
Where do you get parts? I have tried munn racing been good in the past with the parts fiche but they dont seem to do husabergs any more?
Also how do you get the piston out of the housing? There arnt any circlips or anything and the piston dosnt just pull out.

bitsabikes is offline  
December 5th, 2018, 02:33 AM   #2
Senior Member
Joined: Nov 2001
From: Ely, England

Posts: 15,445
Thanks: 403

I Ride: Husaberg FE501e 2003
I can still get them. if you want 2005-2008 with the RR then you need 660100

Taffmeisters - Husaberg, KTM, Husqvarna, Gas Gas, dirt bikes - servicing, tuning, rebuilds, parts

there's always a way!


Taffy is offline  
December 6th, 2018, 07:48 PM   #3
Joined: May 2014
From: new zealand

Posts: 36
Thanks: 3

I Ride: FS650e
Thanks Taffy, I found the parts but still having an issue getting the old piston out of the housing? No c clip holding it in just seems to be a slight ridge on the housing will have another look sat night when i get a chance....cheers
bitsabikes is offline  
December 6th, 2018, 11:18 PM   #4
Senior Member
Rainerio's Avatar
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 913
Thanks: 217

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
Use compress air but be careful point it into a box or something similar.
Rainerio is offline  

  Husaberg Forum > Husaberg Forum > SuperMoto

650, brake, cylinder, front, master, rebuild

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help Finding a Part (Front Brake Master Cylinder) NWDUC Wheels and Tires 5 August 2nd, 2017 12:09 PM
Rear brake master cylinder Bilga Mechanical 14 February 13th, 2017 01:54 AM
Can you tell the front master cylinder diameter by looking? mud400 Wheels and Tires 1 March 26th, 2016 03:41 PM
Where to Buy Clutch Master Cylinder Rebuild Kit for 2002 501 FrankStallone Mechanical 4 September 9th, 2015 10:07 AM
Help! Rear Brake Master Cylinder Broke K2Berg Mechanical 0 November 1st, 2009 10:02 PM

Facebook Twitter Google+ RSS Feed