Husaberg
Go Back   Husaberg Forum > Husaberg Forum > SuperMoto

SuperMoto SuperMoto Forum


Thanks Tree4Thanks
Reply
 
LinkBack Thread Tools Display Modes
July 29th, 2015, 07:58 PM   #21
Senior Member
 
Joined: Aug 2012
From: Lake Tahoe

Posts: 222
Thanks: 17

I Ride:
Originally Posted by LeDelmo View Post
How well do the 15 tooth front sprockets fit on the 570's?
I run 15x44 when supermoto hills riding.
Rensho is offline  
 
July 29th, 2015, 09:42 PM   #22
Senior Member
 
Joined: Feb 2015
From: Minnesota

Posts: 143
Thanks: 8

I Ride: 2011 Husaberg FE570, 2007 Triumph Speed Triple, 2010 Kawasaki Kx450Sm
Thanks every buddy looks like 15/44 is going to be it. I need something that's more versatile because the bike will be more for canyon and hills than anything else. Meaning its going to be needing a good gearing for road use too.

Now has anyone looked at those spacers that were in my Counter shaft seal kit? I have called two dealers and they don't know if I can use the new gold one or not.
LeDelmo is offline  
July 29th, 2015, 09:59 PM   #23
Senior Member
 
WArdogG's Avatar
 
Joined: Jul 2012
From: South Africa

Posts: 201
Thanks: 74

I Ride: FS650 '08/FS650 '04/FE501 '03/FX470 '02
Your best bet would be to just pull the old spacer out and compare with the new one. If they are the same, then you're well away. It should work, but I can't say for sure. The kit you bought, was that for the KTM530 type engines? As the 70* engines were based on those KTM engines, which is why I'm guessing it should work. Also, be sure to change the O-ring that goes inside the lip of the spacer. You will have to pick the old one out from the mainshaft after you remove the spacer and old countershaft seal. In many cases I have found that it was actually the O-ring that was leaking and not the seal, since the O-ring tends to be forgotten when the seal is changed.
WArdogG is offline  
July 30th, 2015, 08:50 AM   #24
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 901
Thanks: 211

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
Just to make your head spin 15/44 = 2.933 , 14/41 = 2.928 and 13/38 = 2.923 are so close you couldn't tell. The bad thing about 15 is some clutch guards will not work and if you want to gear up you can't in front you have to go smaller in rear then you have to shorten the chain. Are your Heads spinning let. And if you have the money go with steel not aluminum unless your selling it.
Rainerio is offline  
July 30th, 2015, 09:43 AM   #25
Junior Member
 
Joined: Mar 2015
From: Charlotte

Posts: 16
Thanks: 10

I Ride:
I run 14/44. Best setup yet. 14/38 sucked. I had a 14/42 for a while and found that cruising around at 50 mph was a pain. It would necessitate a switch to 6th at my normal cruising speed. Made overtaking at the speed a chore. Threw in a 13 front to go with the 42 that was laying around and loved it. Ended up with 14/44 because they didnt make a shiny blue sprocket in that size. Best decision i have ever made in regards to gearing.
Empwrd is offline  
July 30th, 2015, 08:08 PM   #26
Member
 
Joined: Mar 2014
From: Australia

Posts: 77
Thanks: 6

I Ride: 2010 FS570
Yeah, 14/44 is going to be my next sprocket change for sure. The 42 is just a tad too tall.
Aido_570 is offline  
July 30th, 2015, 11:04 PM   #27
Senior Member
 
Joined: Oct 2012
From: Belgium brugge

Posts: 716
Thanks: 168

I Ride: bikes
Correct gearing is hard....
Personal preference riding style rider weight riding conditions and the way the bike is tuned everything makes a difference.
What works great for someone else might be bad for another....
My bike is tuned for more power and revs.
I guess if I would convert it to 610cc I would use slightly longer gearing compared to now 42 rear instead of 44
HusaBELGfs570 is offline  
Reply

  Husaberg Forum > Husaberg Forum > SuperMoto

Tags
converting, fe570, recommended, sizes, sprocket, supermoto



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2011 FE570 rear sprocket size allkidd Husaberg 3 August 17th, 2014 07:25 PM
Whats the best size sprocket to use on supermoto? Pablos90 Wheels and Tires 9 January 8th, 2014 02:25 PM
Gearing, sprocket sizes..? Scarth Mechanical 8 November 9th, 2012 06:16 AM
'09 FE570 - remove front sprocket?? CodeMonkey Mechanical 13 July 20th, 2009 06:49 PM
97 fc supermoto, tyre sizes bergiebearlike SuperMoto 8 December 18th, 2008 11:44 AM


Facebook Twitter Google+ RSS Feed