Husaberg
Go Back   Husaberg Forum > Husaberg Forum > SuperMoto

SuperMoto SuperMoto Forum


Reply
 
LinkBack Thread Tools Display Modes
November 9th, 2014, 10:55 AM   #1
Junior Member
 
Joined: Nov 2014
From: Sweden

Posts: 5
Thanks: 0

I Ride:
Husaberg 650 kickstarter problem

Hi!
While rebuilding the Husaberg Fs650 2002 engine, I noticed that I donīt for sure know how this kickstarter shaft should be monted. It need to be synchronized with the decomp on the other side of the shaft. I tried to mount it as I thought it should me mounted but I am not sure (on the pictures).

Can someone help me to solve this problem like send a picture of how it should be mounted. It will help me a lot!

Thanks
Regards Johan
Sweden
Attached Thumbnails
Husaberg 650 kickstarter problem-dsc_5701.jpg   Husaberg 650 kickstarter problem-dsc_5699.jpg  
jazze is offline  
 
November 9th, 2014, 10:59 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,378
Thanks: 394

I Ride: Husaberg FE501e 2003
the foot should be pointing downwards. then it gets pushed away by the kickstart shaft. you'll see when you do this how it works.

I would encourage you to get the auto decomp working on the cam and remove this POS.

regards

Taffy
Taffy is offline  
November 9th, 2014, 12:06 PM   #3
Junior Member
 
Joined: Nov 2014
From: Sweden

Posts: 5
Thanks: 0

I Ride:
Taffy

Thanks for helping.
I will make a order of the autodecomp from you taffy. I don't want the decompwire like a snake over the whole bike no more.
Does your kit include mounting instruction?
How should i cover the hole from the decomppin above the kickstartershaft?
And do you ship to Sweden if i order it from your ebay site?
jazze is offline  
November 9th, 2014, 12:19 PM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,378
Thanks: 394

I Ride: Husaberg FE501e 2003
we do blanking bolts for the hole at the head and the one at the back that you talk of. anyone can do it but it is the old story of the right length and size etc.

I don't do instructions because you're not physically doing anything you wouldn't do anyway. that's my excuse anyway! LOL!!!


I usually leave the nut on the outside actually. not as pretty but you can't hold the nut on the inside with anything - nothing fits. so not sure how this photo happened?




regards

Taffy

Last edited by Taffy; November 9th, 2014 at 12:29 PM.
Taffy is offline  
November 9th, 2014, 12:43 PM   #5
Junior Member
 
Joined: Nov 2014
From: Sweden

Posts: 5
Thanks: 0

I Ride:
Taffy

Is this the early or late 2002 650 cam?
Do i need any modification or is it just to mount?

Regards
Attached Thumbnails
Husaberg 650 kickstarter problem-dsc_4733.jpg   Husaberg 650 kickstarter problem-dsc_4734.jpg  
jazze is offline  
November 9th, 2014, 12:51 PM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,378
Thanks: 394

I Ride: Husaberg FE501e 2003
the numbers are written on the end of the cam.

you'll see something like 34/02 and then further around you'll see '53' or similar.

the first code is the week of the year the cam was made (34th week of 2002) and the other is the cams code.

regards

Taffy
Taffy is offline  
November 10th, 2014, 08:04 AM   #7
Junior Member
 
Joined: Nov 2014
From: Sweden

Posts: 5
Thanks: 0

I Ride:
Taffy

Now i have checked the cam, and it is like you said. So... is this the early or late cam?
I just want to know, if I buy your autodecomp kit on ebay. Does it fit my cam without any modification? It can't be hard to mount.
Regards
Attached Thumbnails
Husaberg 650 kickstarter problem-dsc_5706.jpg   Husaberg 650 kickstarter problem-dsc_5705.jpg   Husaberg 650 kickstarter problem-dsc_5704.jpg  
jazze is offline  
November 10th, 2014, 08:27 AM   #8
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,378
Thanks: 394

I Ride: Husaberg FE501e 2003
Hello Jazze

I'm afraid that it it isn't a straight fit. because the cam was made in 2001 it still has the thick cam shoulder so the kit will NOT fit.

your bike will NOT start with the 53 cam fitted on the electric starter.

so given that you want the electric start to work and you have a cam with a thick shoulder I suggest that you

buy the 08 cam
part exchange in your 53 cam (someone will love it one day)
buy a 35 PJ as well as/and or a 33PJ.
then the ADC is fine!
some people would invest in new bearings while they are there and leave the seals on.

check the atomiser in your carb for wear. look down the atomiser for a 0.1mm wide shelf that is 2mm down. if this shoulder is wearing away you need to change it and preferwably the needle.

check you have a CD1 jet.

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Husaberg Forum > SuperMoto

Tags
650, husaberg, kickstarter, problem



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Husaberg FE 390 clutch problems Roy Mechanical 0 October 12th, 2014 12:57 PM
Husaberg FE 501 Starter Problem Onetouch80 Mechanical 14 July 15th, 2013 12:30 AM
1995 husaberg fc 600 starting problem ? nathan95fc600 Husaberg 18 July 10th, 2013 01:15 PM
Husaberg 650 02 Rocketarm bearing problem Finnar Mechanical 12 August 24th, 2009 01:53 PM
2000 Husaberg Fe400E Problem berniebc Mechanical 9 January 21st, 2005 08:08 AM


Facebook Twitter Google+ RSS Feed