Husaberg
Go Back   Husaberg Forum > Husaberg Forum > SuperMoto

SuperMoto SuperMoto Forum


Reply
 
LinkBack Thread Tools Display Modes
February 17th, 2010, 01:56 AM   #31
Junior Member
 
Joined: Nov 2009
From:

Posts: 21
Thanks: 0

I Ride:
Re: The 570 is ready

Originally Posted by Lukas560
Originally Posted by 993sdad
do you have any pics of were yuo have cut out for the air flow intake please.
I want to make hole with some filter in seat for better air flow to DNA filter. This make also bergos I mean.
I agree but what if its raining or really dusty?+if you are driving the air is flowing into the filter,you can make the cutting also very big take a look on the bike and you will see!The same thing of a racer do you understand what i mean?
greets
slider is offline  
 
February 17th, 2010, 10:08 AM   #32
Member
 
Joined: Jan 2010
From:

Posts: 68
Thanks: 0

I Ride:
Re: The 570 is ready

sorted the clutchit had a 950nm spring in so now the 750 is in place.
993sdad is offline  
February 18th, 2010, 04:02 AM   #33
Senior Member
 
Joined: Mar 2009
From: Cyprus

Posts: 131
Thanks: 0

I Ride:
Re: The 570 is ready

Does anyone know if a dev.Tech will fit on a '04 FS650?

http://www.dev-tech.ch/schwinge_gallerie-eng.html
Robg187 is offline  
February 18th, 2010, 12:58 PM   #34
Member
 
Joined: Nov 2009
From: Sweden

Posts: 38
Thanks: 0

I Ride:
Re: The 570 is ready

Originally Posted by Robg187
Does anyone know if a dev.Tech will fit on a '04 FS650?

http://www.dev-tech.ch/schwinge_gallerie-eng.html
Hey..
It wont fit, its only for the 2009-2010 bergs.

// Slime
Slime is offline  
February 18th, 2010, 01:42 PM   #35
Member
 
Joined: Jan 2010
From:

Posts: 68
Thanks: 0

I Ride:
Re: The 570 is ready

our swing arm came off 2009 450 smr, we had to machine it and take 6mm off the inside so to fit around the engine case pivot point
993sdad is offline  
February 18th, 2010, 03:21 PM   #36
Junior Member
 
Joined: Feb 2010
From: Czech Republic

Posts: 13
Thanks: 0

I Ride:
Re: The 570 is ready

Originally Posted by slider
Originally Posted by Lukas560
Originally Posted by 993sdad
do you have any pics of were yuo have cut out for the air flow intake please.
I want to make hole with some filter in seat for better air flow to DNA filter. This make also bergos I mean.
I agree but what if its raining or really dusty?+if you are driving the air is flowing into the filter,you can make the cutting also very big take a look on the bike and you will see!The same thing of a racer do you understand what i mean?
greets
Yes I know rain is problem, but I believe we prepare something for that. Sorry for second thing, but I dont understand. My english isnt really good.
Lukas560 is offline  
February 18th, 2010, 03:27 PM   #37
Junior Member
 
Joined: Feb 2010
From: Czech Republic

Posts: 13
Thanks: 0

I Ride:
Re: The 570 is ready

Originally Posted by 993sdad
our swing arm came off 2009 450 smr, we had to machine it and take 6mm off the inside so to fit around the engine case pivot point
Swing arm from SMR is shorter than original on Husaberg? I can have swingarm from 04 SMR, but I think thats isnt ideal setup for new Husaberg. Where I can get one from 09 SMR?
Lukas560 is offline  
February 19th, 2010, 04:45 AM   #38
Senior Member
 
Joined: Mar 2009
From: Cyprus

Posts: 131
Thanks: 0

I Ride:
Re: The 570 is ready

Hey..
It wont fit, its only for the 2009-2010 bergs.

// Slime[/quote]

Thanks's for the reply. sad!!!! wasn't hoping for that answer.
Robg187 is offline  
February 23rd, 2010, 06:16 AM   #39
Junior Member
 
Joined: Dec 2009
From:

Posts: 23
Thanks: 0

I Ride:
Re: The 570 is ready

What is the improvement of using the Suter SA over the stock SA?
45degrees is offline  
February 23rd, 2010, 10:34 PM   #40
Member
 
Joined: Nov 2009
From: Sweden

Posts: 38
Thanks: 0

I Ride:
Re: The 570 is ready

Originally Posted by 45degrees
What is the improvement of using the Suter SA over the stock SA?
HI
Its many improvments.. The sa is much stiffer that is good for sm, and wider you easily fit a 5,5 wheel, it has a middle chain guard so the chain cant rubb the tire, it has a wider adjutment 45mm so you can djust the wheel base shorter that you want in sm, and the sa is shorter as well, and it has exentric change for the damper so you can change the rear end height around 15mm, and it also looks great

// Slime
Slime is offline  
Reply

  Husaberg Forum > Husaberg Forum > SuperMoto

Tags
570, ready



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ready for the snow to go away! jtg_york Husaberg 13 February 25th, 2013 01:05 AM
getting my fe 450 ready to ride. greenshovel0014 Husaberg 6 February 5th, 2011 01:51 PM
Ready for scratchin' Big Booger Husaberg 1 January 24th, 2011 07:55 PM
ready to give up!!!!! mberg501 Husaberg 43 February 19th, 2007 08:34 PM


Facebook Twitter Google+ RSS Feed