Husaberg
Go Back   Husaberg Forum > Husaberg Forum > SuperMoto

SuperMoto SuperMoto Forum


Reply
 
LinkBack Thread Tools Display Modes
November 29th, 2009, 09:06 PM   #1
Junior Member
 
Joined: Nov 2009
From:

Posts: 5
Thanks: 0

I Ride:
Rad Guard for FS650?

Hi All, Picked up my 04 FS650, had a few questions I wanted answering (if someone doesnt mind feeding the noob )

Ive had a good read of the owners doc, so most of it I understand but just the following I need a bit of guidance.

1. Rad Guards - Will a CRF450 guard fit with no modification?

2.Primary Crankshaft Gear - Thought to be a problem on the 04 FS650s? read the owners doc, but cant find what the actual solution is?

THANKS IN ADVANCE!
OZ-Berg is offline  
 
November 29th, 2009, 09:29 PM   #2
Senior Member
 
Joined: Dec 2004
From: Bend, Oregon

Posts: 453
Thanks: 0

I Ride:
Been a while since I posted up, and if I am wrong somebody will set me straight, so here we go.

Rad guards are Husaberg specific, the CRF guard will need to be modified, not a bolt on, contact BOSS here on the UHE if you want some bolt on guards.

I believe the issue with the crank gear on some 650s is they were coming loose / not properly torqued from the factory, seemed like it was an Austrailia only issue if I remember right, and that is all I can remember on that. More than likely, if it hasn't happened yet, it's not going to be anything to worry about now.

Hope this helps.
BendBerg is offline  
November 29th, 2009, 09:37 PM   #3
Junior Member
 
Joined: Nov 2009
From:

Posts: 5
Thanks: 0

I Ride:
ok great, thanks for the help! .... well the previous owner put a new donk in it in febuary to the tune of $5200 thanks very much, was done by a Berg dealer so all should be good lol... Im just trying to get my head around the bike as im new to the swedish beasts!
OZ-Berg is offline  
November 29th, 2009, 10:33 PM   #4
Senior Member
 
bushmechanic's Avatar
 
Joined: Jun 2007
From: south east WA Australia

Posts: 3,772
Thanks: 1065

I Ride: 2008 700FK, 2002 628FST
I use loctite 609 on the gear and 262 on the nut, there are better ones like 2701 or 630

last time i was in there I copied JBS racings setup

http://www.husaberg.org/index.php?set_a ... _photo.php

http://www.husaberg.org/index.php?set_a ... _photo.php
bushmechanic is offline  
Reply

  Husaberg Forum > Husaberg Forum > SuperMoto

Tags
fs650, guard, rad



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mud/shocker guard hrushton59 Tech 1 July 3rd, 2012 04:57 PM
FMF Megabomb Guard Stewballs Exhausts 4 April 29th, 2012 07:33 PM
Need a Chain guard Bayside Burg Husaberg 0 August 10th, 2010 05:37 PM
Bash guard squarehead2 Husaberg 4 November 3rd, 2007 11:03 AM
New sump guard madmark Tech 9 August 9th, 2007 06:29 AM


Facebook Twitter Google+ RSS Feed