Go Back   Husaberg Forum > Husaberg Forum > SuperMoto

SuperMoto SuperMoto Forum

LinkBack Thread Tools Display Modes
July 14th, 2009, 05:28 AM   #1
Junior Member
Joined: Jul 2009
From: UK

Posts: 10
Thanks: 0

I Ride:
BRO-10 or BRO-12 for Beringer 6 pot caliper?


I am looking to buy the Beringer 6 pot supermoto kit for my FE and wonder if people could give me there opinions on which master cylinder is the best match.

I would mainly be riding on the road and prefer feel/control over power. I'd still like to be able to hall a stoppie once in a while, but I'd rarely be hammering the brake like on a track day.

Beringer recommend the BRO-12 for their 6 pot. Does the 12 give very good feel? Would a BRO-10 just be too small to push the caliper?

If you look at this thread (, Enginehardware recommends a 13mm Beringer master cyclinder (confusing as the BRO-10 is 14.5mm and BRO-12 is 17.5mm)?

kerplunkwhoops is offline  
July 15th, 2009, 12:58 AM   #2
Senior Member
Joined: Jan 2007
From: South Wales, UK

Posts: 110
Thanks: 0

I Ride:
RE: BRO-10 or BRO-12 for Beringer 6 pot caliper?

you want the 12 with a 6 pot, i happen to have a 6 pot here if your still looking, £150 also a disc £80
swsupermoto is offline  

  Husaberg Forum > Husaberg Forum > SuperMoto

beringer, bro10, bro12, caliper, pot

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Beringer caliper edoardo SuperMoto 11 November 30th, 2009 05:05 PM
Beringer michie Wheels and Tires 9 August 18th, 2009 04:42 AM
beringer 4pot radial supermot caliper trkt4 sparkychamp Wheels and Tires 4 May 1st, 2008 06:37 PM
Beringer and stock FE caliper Andersson SuperMoto 11 March 22nd, 2008 04:37 PM
Beringer 6 pot pads stickywicket SuperMoto 16 April 23rd, 2006 12:38 AM

Facebook Twitter Google+ RSS Feed