Husaberg
Go Back   Husaberg Forum > Lobby > New Users

New Users Post up here and introduce yourself!


Reply
 
LinkBack Thread Tools Display Modes
May 1st, 2020, 10:00 AM   #1
Junior Member
 
FraserThompsom's Avatar
 
Joined: Apr 2020
From: Shropshire

Posts: 25
Thanks: 0

I Ride: FE650
FE650 Wiring Loom, does this look right?

Hi guys,

I have followed everyone's advice on here so far and have managed to make my 2002 FE650 start on the second / third kick.

It is kick start only and I but has the Sprague bearing and everything in the crank case (assumably a previous electric start then stripped).

I have found this loom for sale and just wanted to check if it has everything I need (I have the headlight to brake light wiring with the stator, SEM CDI and regulator).

All I am intending to use on this loom is all electric start related components but the colours don't match the wiring diagram!

Can anyone see anything missing apart from the mentioned above (and the headlight plug as this is missing also)?

Any help is appreciated guys, thanks in advance!
FraserThompsom is offline  
 
May 2nd, 2020, 12:07 PM   #2
Junior Member
 
FraserThompsom's Avatar
 
Joined: Apr 2020
From: Shropshire

Posts: 25
Thanks: 0

I Ride: FE650
For some reason the images didn't upload, sorry guys...
Attached Thumbnails
FE650 Wiring Loom, does this look right?-screenshot_20200501-184943_messenger.jpg   FE650 Wiring Loom, does this look right?-screenshot_20200501-184955_messenger.jpg   FE650 Wiring Loom, does this look right?-screenshot_20200501-184959_messenger.jpg   FE650 Wiring Loom, does this look right?-screenshot_20200501-185011_messenger.jpg  
FraserThompsom is offline  
May 2nd, 2020, 02:46 PM   #3
Junior Member
 
Joined: Apr 2020
From: Northland New Zealand

Posts: 7
Thanks: 0

I Ride:
Hey Fraser.
Which wires dont match the diagram?
Looks like you have all the wires needed for starter but its tricky moving the pc to the workbench for direct comparison.
Bergbro1 is offline  
May 2nd, 2020, 11:11 PM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,102
Thanks: 508

I Ride: Husaberg FE501e 2003
you have double brown and a double red/white going into the reg/rec which I've never seen before. it also has an aftermarket left-hand switchgear. It will probably work.

you have a blue/white & red/black 2-pin socket. that is the take off from the solenoid to the Ignition Module.

Taffy
Taffy is offline  
May 3rd, 2020, 12:10 PM   #5
Junior Member
 
FraserThompsom's Avatar
 
Joined: Apr 2020
From: Shropshire

Posts: 25
Thanks: 0

I Ride: FE650
Hi Both,

Thanks for the reply 😊

I has the kick start loom so I might just nick the good bits off and use on my loom.

I can't either get this loom thats been adapter a bit or a complete stock one off a FE400 2002, do you think it will just be simpler to buy the FE400 stock loom?
FraserThompsom is offline  
May 3rd, 2020, 12:14 PM   #6
Junior Member
 
FraserThompsom's Avatar
 
Joined: Apr 2020
From: Shropshire

Posts: 25
Thanks: 0

I Ride: FE650
Oh and the wires that didn't add up were the ones that Taffy pointed out really.

I wasn't too sure what the brushed aluminium component was next to the 2 pin connection that Taffy mentioned.

I'm guessing its the starter relay?
FraserThompsom is offline  
May 3rd, 2020, 05:09 PM   #7
Junior Member
 
Joined: Apr 2020
From: Northland New Zealand

Posts: 7
Thanks: 0

I Ride:
if your refering to the silver thingy with the rubber around it, thats your inicator flasher.

if you download the wire diagram from this site you can identify your components and which wires you no longer need (indicator/lights) for removal (if thats your thing).
Bergbro1 is offline  
May 3rd, 2020, 11:23 PM   #8
Junior Member
 
FraserThompsom's Avatar
 
Joined: Apr 2020
From: Shropshire

Posts: 25
Thanks: 0

I Ride: FE650
Thanks BergBro!

I'm just trying to learn as I go, apologies for all of the questions both 😊
FraserThompsom is offline  
May 4th, 2020, 01:56 PM   #9
Junior Member
 
Joined: Apr 2020
From: Northland New Zealand

Posts: 7
Thanks: 0

I Ride:
sweet as Fraser.
Asking is a good way to learn.

I am in the process of restoring the same bike so those are easy questions.
Bergbro1 is offline  
May 5th, 2020, 04:53 AM   #10
Junior Member
 
FraserThompsom's Avatar
 
Joined: Apr 2020
From: Shropshire

Posts: 25
Thanks: 0

I Ride: FE650
Couldn't agree more!

If you don't mind me asking what are your plans?
FraserThompsom is offline  
Reply

  Husaberg Forum > Lobby > New Users

Tags
fe650, loom, wiring



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
FE650 Wiring Loom (Kick Start Only) FraserThompsom New Users 10 April 22nd, 2020 01:03 AM
wiring harness/loom 1995-2003 era Taffy Electrical 5 September 10th, 2019 07:17 AM
wiring harness/loom Taffy Electrical 0 June 14th, 2017 12:13 AM
Wiring loom for fe450 steve-berg Electrical 2 February 18th, 2016 09:58 AM
Fe 390 shock, exhaust and main wiring loom. cwidova Tech 2 March 4th, 2014 01:13 AM


Facebook Twitter Google+ RSS Feed