Go Back   Husaberg Forum > Husaberg Forum > Motorcycle Talk

Motorcycle Talk For topics and discussions about all motorcycle makes and models

Thanks Tree1Thanks
  • 1 Post By borsiin
LinkBack Thread Tools Display Modes
December 30th, 2017, 10:25 PM   #1
Senior Member
Rainerio's Avatar
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 869
Thanks: 195

I Ride: 7 Husabergs two FE570S,FS570 FE390/450,07 FE650,05 FE550,2 Husqvarna's 86 WR400,87 510,09 Buell
All Balls

Any thoughts on All Balls stuff is it any good? See a lot of it on eBay
Rainerio is online now  
December 31st, 2017, 02:09 AM   #2
Senior Member
Joined: Jan 2008
From: South Western Ontario

Posts: 154
Thanks: 26

I Ride:
I have used them in the passed, wheel bearings and seals for the most part. Steering head bearings a couple of times. They worked OK, I have no real complaints.

fedge is offline  
December 31st, 2017, 03:49 AM   #3
Senior Member
Joined: Aug 2011
From: Ontario, Canada

Posts: 915
Thanks: 95

I Ride: 01 Husaberg fe650
Bearings are ok....they need grease though.
I usually pop the seals and add some waterproof grease.
Kayeffess is offline  
December 31st, 2017, 06:35 AM   #4
Joined: Jan 2004
From: Sweden

Posts: 34
Thanks: 4

I Ride:
It is cheap Chinese bearings. That said all chassis bearings on a Husa dies due to corrosion not mechanical wear. So a Chinese bearing works fine as long as it stays lubed.
Thanks from Rainerio

Last edited by borsiin; January 1st, 2018 at 05:33 AM.
borsiin is offline  
January 1st, 2018, 01:24 AM   #5
Junior Member
Joined: Aug 2017
From: AU

Posts: 6
Thanks: 0

I Ride:
Originally Posted by Rainerio View Post
Any thoughts on All Balls stuff is it any good? See a lot of it on eBay
I had new wheel bearings fitted to my husaburg at a very reputable shop and they used this brand so I'd say yes ok to use mate.

Sent from my SM-G930F using Tapatalk
meandean108 is offline  

  Husaberg Forum > Husaberg Forum > Motorcycle Talk


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
all balls seal head for rear shock The_Force Suspension 2 April 8th, 2011 05:06 AM
all balls get it wrong Taffy Suspension 1 January 25th, 2009 05:32 AM

Facebook Twitter Google+ RSS Feed