Husaberg
Go Back   Husaberg Forum > Husaberg Forum > Motorcycle Talk

Motorcycle Talk For topics and discussions about all motorcycle makes and models


Reply
 
LinkBack Thread Tools Display Modes
October 23rd, 2014, 11:00 AM   #1
Roy
Junior Member
 
Joined: Oct 2014
From: israel

Posts: 11
Thanks: 0

I Ride:
about the screws oil ..

about husaberg fe 390 .
For an oil change have to open the two screws?
Are the two screws underneath to prevent oil are separate or that the oil tank?

thank you
Roy is offline  
 
October 23rd, 2014, 12:05 PM   #2
Senior Member
 
tourist's Avatar
 
Joined: Nov 2012
From: Iceland

Posts: 2,300
Thanks: 752

I Ride: 1 Berg, 1 Zook
First one screw, then the other screw

It is one single oil supply, so both holes go to the same place ... The first one "lets the oil out", the second one has a screen in it.

I would take both. Get all the oil out, and also check/clean the oil screen.

Last edited by tourist; October 23rd, 2014 at 12:18 PM.
tourist is offline  
October 24th, 2014, 02:21 AM   #3
Roy
Junior Member
 
Joined: Oct 2014
From: israel

Posts: 11
Thanks: 0

I Ride:
thank you very much
Roy is offline  
Reply

  Husaberg Forum > Husaberg Forum > Motorcycle Talk

Tags
oil, screws



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tank Screws clark1 Fuel 6 November 25th, 2010 04:22 PM
worn out clamping screws thread matikrimerman Mechanical 9 February 25th, 2009 11:52 AM
Screws/nuts going loose and loosing them... Proemer Mechanical 1 March 6th, 2007 03:12 PM
Oil Leak from Stator Screws? BlueLakeBerg Mechanical 11 July 21st, 2006 12:36 PM
ignition screws loosening oyk Mechanical 1 February 12th, 2005 06:04 AM


Facebook Twitter Google+ RSS Feed