Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
February 2nd, 2009, 09:33 PM   #1
Junior Member
 
Joined: Feb 2009
From: Newcastle, Australia

Posts: 6
Thanks: 0

I Ride:
Interchangable parts 501 -550

Hi currently have an 02 fe501 and was wondering if any engine parts are interchangable with an 05 fe 550. Piston, sleeve and any others. Cheers
dean501 is offline  
 
February 3rd, 2009, 05:05 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,408
Thanks: 396

I Ride: Husaberg FE501e 2003
RE: Interchangable parts 501 -550

say hello dean, be pleasant now......

suggest you put the bike and location in your signature fella.
i guess you want a 550 out of your 501 right?
the linar and piston will fit straight in.

regards

Taffy
Taffy is offline  
February 3rd, 2009, 12:08 PM   #3
Senior Member
 
Joined: Jul 2007
From: PORTLAND NSW AUSTRALIA

Posts: 130
Thanks: 1

I Ride:
Gday Taffy

What about other internals such as main bearings, water bearing/seals, crank, I ask as dean501 is interested in purchasing a heap of parts I have, full list is in the classifieds
also to test your abundant knowledge will the piston/rings and sleeve fit a 450, I think the piston is the same size but as the stoke is different I am not sure if the sleeve is correct
Thanks for any info
MEDOGROCKET is offline  
February 3rd, 2009, 12:58 PM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,408
Thanks: 396

I Ride: Husaberg FE501e 2003
Originally Posted by MEDOGROCKET
Gday Taffy

What about other internals such as main bearings, water bearing/seals, crank, I ask as dean501 is interested in purchasing a heap of parts I have, full list is in the classifieds
also to test your abundant knowledge will the piston/rings and sleeve fit a 450, I think the piston is the same size but as the stoke is different I am not sure if the sleeve is correct
Thanks for any info
the first list of items go straight in.

correct onthe second part. the piston will, the linar won't. it's long to go with the long case. 450 is a short-arse!

regards

Taffy
Taffy is offline  
February 3rd, 2009, 08:34 PM   #5
Junior Member
 
Joined: Feb 2009
From: Newcastle, Australia

Posts: 6
Thanks: 0

I Ride:
Yeah sorry new member. Did a little research and found that the piston was 5mm smaller in diameter but you said the linar will fit in. Is it just that the linar is thinner to accomadate the 100mm piston. Thanks for your input its much appreciated.
dean501 is offline  
February 3rd, 2009, 11:47 PM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,408
Thanks: 396

I Ride: Husaberg FE501e 2003
yes so you could have yours bored out.

regards

Taffy
Taffy is offline  
February 4th, 2009, 05:28 AM   #7
Senior Member
 
Joined: Jul 2002
From: Zwiesel, Germany (Bavarian)

Posts: 201
Thanks: 0

I Ride:
In reverse I think the 501 (95mm) barrel fits in a 550 crankcase.

This becomes the 496 ccm engine, right?

I have a 501 barrel at home from my old 501.
I think a new coating is needed.

But this is a consideration for the further future, probably I do it never.
Husa98 is offline  
February 17th, 2009, 01:49 AM   #8
Junior Member
 
Joined: Feb 2009
From: Newcastle, Australia

Posts: 6
Thanks: 0

I Ride:
parts

Just letting you know that i purchased the parts out of the classifieds on this site and they look great very happy with them. Im now in need of a headgasket but stupid me hadn't thought about the different sized piston and was wondering if my 501 head will still be able to be used. Thanks Dean
dean501 is offline  
February 17th, 2009, 02:30 AM   #9
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,408
Thanks: 396

I Ride: Husaberg FE501e 2003
RE: parts

the headgasket goes with the linar. 100mm linar needs 101mm headgasket. the 95mm linar needs the 96mm headgasket.

regards

Taffy
Taffy is offline  
February 18th, 2009, 01:09 AM   #10
Junior Member
 
Joined: Feb 2009
From: Newcastle, Australia

Posts: 6
Thanks: 0

I Ride:
Thanks very much taffy for your input. Will be ordering this and a few other parts off you soon. Cheers
dean501 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
501, 550, interchangable, parts



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is a 2004 engine interchangable with a 2008? franknorway SuperMoto 3 July 21st, 2010 03:14 AM
KTM Parts offering limited Husaberg parts and bikes. Hair Marketplace 35 November 15th, 2009 12:18 AM
NEED HELP...Looking for parts... SimonFE400 Husaberg 5 May 23rd, 2007 08:29 AM
Husaberg parts,parts books and pricing nsman Mechanical 1 February 24th, 2007 01:47 PM
Are Berg Motard wheel sets interchangable with KTM? Rideguy Husaberg 3 November 4th, 2004 09:25 AM


Facebook Twitter Google+ RSS Feed