Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
April 26th, 2004, 04:02 AM   #1
Senior Member
 
Joined: Apr 2004
From: West Sussex, England

Posts: 118
Thanks: 0

I Ride:
Noisy Engine

Had a noise coming from the clutch side of my 03 FS650e, thought it was the freewheel on the e-starter to begin with turns out to be the counter balance shaft bearing.

This was going to be an update to a previous post,
Badvoc is offline  
 
May 2nd, 2004, 08:48 AM   #2
Senior Member
 
Joined: May 2004
From: Germany

Posts: 304
Thanks: 0

I Ride:
Hi,
I know your problem. We are a couple of MX-freaks who ride different models of Husabergs.
A friend of mine bought a new bike last year (also a ´03 model). He had also noise coming out of the clutch side. First of all we had to change the nut on the driving shaft. It was the wrong part for this enginge. The result of the wrong nut was that the gear wheel on the driving shaft was getting loose after riding a longer time with higher rpm´s (hot engine).
Half a year later we found out that the driving chain was very very loose and scratched the crankcase. The camchain tensioner was in the end-position, but it could not be that the chain has to be replaced after 20h using the bike. So we heard from our dealer that there is a new designed camchain tensioner (the plastic thing that´s pressed against the chain). With this part the chain gets more tension.
Did you have some metal bits in your oil screen? That would be a hint if the chain is scratching the crankcase.
hribman is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
engine, noisy



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
noisy engine roguetrooper68 Husaberg 1 September 8th, 2013 03:58 AM
Noisy bottom end adz97 Mechanical 3 August 17th, 2012 10:04 AM
Noisy 650 engine! 650andy Mechanical 10 May 19th, 2009 01:38 PM
Another noisy engine thread Bpeters Mechanical 10 May 15th, 2009 02:34 AM
05FE650 - NOISY ENGINE - CLUTCH SIDE Chubba Mechanical 12 December 27th, 2006 09:07 AM


Facebook Twitter Google+ RSS Feed