Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
September 1st, 2008, 07:40 AM   #1
Senior Member
 
Joined: Oct 2006
From: Belgium

Posts: 381
Thanks: 1

I Ride:
Defcon 3?

Foudn this after draining my oil, should I go to Defcon 3?

Particels (spelling?) are only slightly magnetic. I have to hold the magnet really close (less than 1mm) to pick up the particels.

Bike has done roughly 1000km since rebuild.



BelgiqueBasterd is offline  
 
September 1st, 2008, 09:52 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,067
Thanks: 503

I Ride: Husaberg FE501e 2003
RE: Defcon 3?

i'd say you were ok?

regards

Taffy
Taffy is offline  
September 1st, 2008, 01:23 PM   #3
Moderator
 
berger's Avatar
 
Joined: Apr 2002
From: Phoenix Arizona

Posts: 3,152
Thanks: 10

I Ride: 2010 FX450
I'll second that. Change the oil and ride it. Just keep an eye on it.
berger is offline  
September 1st, 2008, 01:55 PM   #4
Senior Member
 
Joined: Jun 2001
From: Troutdale, Oregon USA 2005 FE550e

Posts: 1,274
Thanks: 10

I Ride:
I'd be a little concerned if I found a vice and hammer in my oil....
logjump is offline  
September 1st, 2008, 09:11 PM   #5
Senior Member
 
Joined: May 2005
From: WEST TEXAS

Posts: 156
Thanks: 0

I Ride:
Originally Posted by logjump
I'd be a little concerned if I found a vice and hammer in my oil....
bergdude is offline  
September 1st, 2008, 09:16 PM   #6
Senior Member
 
Joined: May 2005
From: WEST TEXAS

Posts: 156
Thanks: 0

I Ride:
Originally Posted by logjump
I'd be a little concerned if I found a vice and hammer in my oil....
bergdude is offline  
September 2nd, 2008, 10:59 AM   #7
Senior Member
 
Joined: Oct 2006
From: Belgium

Posts: 381
Thanks: 1

I Ride:
Ok, i'll stand down to Defcon 1 then
BelgiqueBasterd is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
defcon



Thread Tools
Display Modes



Facebook Twitter Google+ RSS Feed