Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
August 11th, 2008, 07:29 PM   #1
Junior Member
 
Joined: Jul 2008
From:

Posts: 2
Thanks: 0

I Ride:
Replacement gear/shift lever

Bike in question is an 05 FS650e

Had a bit of a search around but could not turn up much.

The vibratey bastoid vibed itself off the stand warming up in the driveway while I turned my back to shut the garage door.

Bar end and clutch lever ate the dirt but the gear lever managed to eat the driveway

I am awaiting some new boots in the mail and for now am riding in sneakers so I have the lever quite low and it sits underneath the casing so it bent itself good and proper.

I managed to bend it back out again enough so it is still usable but its kinda munted and I probably need to look for a replacement.

Problem is "husaberg gear lever" does not yeild much

http://cgi.ebay.com.au/Yamaha-FORGED-Bl ... dZViewItem

http://cgi.ebay.com.au/ALLOY-CNC-GEAR-S ... dZViewItem

Something like the above looks to be about the right size/shape but I have no idea if it will fit or not.

I have found a few in europe but prices are pretty meh and postage is retarded to Aus, is there any cheaper options?

Advice?
rubba is offline  
 
August 11th, 2008, 08:41 PM   #2
Senior Member
 
Joined: Jul 2007
From: PORTLAND NSW AUSTRALIA

Posts: 130
Thanks: 1

I Ride:
Sutto's had a after market one the other day for $70
MEDOGROCKET is offline  
August 13th, 2008, 03:24 AM   #3
Senior Member
 
Joined: Apr 2003
From: Newcastle, NSW, Australia

Posts: 1,061
Thanks: 3

I Ride:
I got one recently off eBay Oz and it was advertised as a VOR 503 replacement. The VOR part number is 55210410 and it is all aluminium.

The berg number is 230-034-02 up to 2003 then the number changed to 800.34.031.000. Tracing back thru the parts manuals it looks like they are the the same for all bergs back to '89, however the later drawings of it look different.

Another option - with a bit of a bend & file a Yamaha TT600 or XT600 lever from the early to mid '80s fits. The XT one even has the rubber thingy on it to protect your boot.
BundyBear is offline  
August 13th, 2008, 09:33 AM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,157
Thanks: 523

I Ride: Husaberg FE501e 2003
http://cgi.ebay.co.uk/HUSABERG-GEAR-CHA ... .m14.l1318
Taffy is offline  
August 13th, 2008, 12:51 PM   #5
Senior Member
 
Joined: May 2002
From: Snowy Mountains NSW Australia

Posts: 1,598
Thanks: 131

I Ride:
OTTMH the newer style levers will retrofit, but the older model, pre2001 or so, will not due fit later models to the angle as it leaves the shaft and wraps around the clutch cover. At least that is the case with my 650 vs 501.

Steve
steve is offline  
August 13th, 2008, 08:09 PM   #6
Junior Member
 
Joined: Jul 2008
From:

Posts: 2
Thanks: 0

I Ride:
Sutto's have em
Found em on google - problem solved.

Thanks
rubba is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
gear or shift, lever, replacement



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gear shift lever 04 550 520pilot Husaberg 3 June 12th, 2013 10:38 PM
Aftermarket shift lever? Dieselfool Mechanical 8 October 5th, 2012 03:05 AM
Shift lever Electrified Tech 5 November 25th, 2011 06:55 PM
2010 FE390. Oil leaking from base of shift lever MikeAdamson Mechanical 1 May 13th, 2011 12:41 PM
Will not shift to 3rd gear gvnick Mechanical 1 June 8th, 2010 03:24 PM


Facebook Twitter Google+ RSS Feed