Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
June 18th, 2008, 08:15 PM   #1
Junior Member
 
Joined: Sep 2007
From:

Posts: 7
Thanks: 0

I Ride:
kick starter

My 01 FE 650 somtimes when kicking it over will seem to jamb up about half way thru the stroke. To get it to move I have to pull the hand compression release and the kick start lever will then return and it will kick over. Has anyone had this trouble. Also trying to work out my e start troubles.The starter is the replacement one and the Z7 battery. When the bike was new in 01 it e started hot n cold . Took it in for valve adjustment and the shop replaced the solid gear with the slip type , while installing the slip clutch they had something jamb and couldnt get the engine to turn over. Just wondering if those events are related for the e start troubles.
hawk is offline  
 
June 18th, 2008, 10:44 PM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,145
Thanks: 355

I Ride:
RE: kick starter

i hope others will give their view but i think something is wrong at the kickstart mechanism?

as for the starter, i would think that that is weak and not up to the job anymore.

your decomp lobe is not doing it's job either. there is a new design available that is called the dutch clog so go into the doc and check it out.

jamming kickstart
need the later decomp bump and spring
starter should be changed to honda or yamaha and mounting modified.

hope i'm on the money....

regards

Taffy
Taffy is offline  
June 19th, 2008, 04:53 AM   #3
Junior Member
 
Joined: Sep 2007
From:

Posts: 7
Thanks: 0

I Ride:
The cam and uloader were replaced about 2 years ago the starter is about a year.Had the bike at the shop during that time it wasnt being ridden.Have it back now checked the compression it look to be about 30 psi when kicking over. Reset the valves too about .005 to .006 to try to remove some of the cranking resistance for the starter havnt rechecked the compression . The original valve springs are in the engine and hear slight rocker noise at that setting.
hawk is offline  
June 19th, 2008, 11:25 AM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,145
Thanks: 355

I Ride:
i could go on and on mate but you really need to read the doc, see what decomp you have fitted, think about a plug, check the kickstart etc etc etc

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
kick, starter



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kick starter BelgiqueBasterd Mechanical 7 December 5th, 2014 04:14 PM
Kick Starter?? BIG-E Mechanical 9 November 12th, 2011 07:44 AM
Reassembling the kick starter Hair Mechanical 2 July 10th, 2009 07:04 PM
fe400e kick starter orangesmoke Mechanical 4 October 27th, 2008 10:15 PM
Kick Starter Lever bigV Husaberg 3 August 3rd, 2006 03:43 PM


Facebook Twitter Google+ RSS Feed