Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
May 17th, 2008, 03:59 AM   #1
squizz's Avatar
Joined: Apr 2006
From: Brisbane Australia

Posts: 94
Thanks: 0

I Ride: 08 FE450
broken bracket

Went riding again today, had a bit of a crappy ride in the wattagans north of Sydney. The terrain was great, but it took us 5 hours 30km, mainly because of unskilled and ill prepared riders.

Any how my question to you all is, has anyone broken the bracket off that holds the voltage regulator. When i got back to the trailer i found in just hanging don near the carb. What is the best way to fix
squizz is offline  
April 13th, 2009, 01:40 PM   #2
Joined: Apr 2006
From: Portland OR

Posts: 79
Thanks: 0

I Ride:
i had the same issue on my 06 450. so i flipped it around and used a bolt with a larger shoulder to spread out the pressure, prayin it wouldn't happen again......well it didn't... the dam bolt broke off in the bung WTF i used locktight and made SURE not to over-tighten the bolt....

whats causing this? and how the hell do i fix it without pullin the motor to drill out the bung?
tinbanger is offline  
April 13th, 2009, 04:36 PM   #3
berger's Avatar
Joined: Apr 2002
From: Phoenix Arizona

Posts: 3,152
Thanks: 10

I Ride: 2010 FX450
I have mine stuck to the frame up front by the forks like a KTM. I moved it there when I put in the under seat tank. It's just held on with industrial 2 sided tape. The harness should be long enough to make it.

There should be a better picture in my gallery.
berger is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

bracket, broken

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
CNC bracket for R6 starter upgrade Jc65nogo Electrical 4 April 28th, 2014 08:40 PM
Help with front calliper bracket manxrc8 Mechanical 1 March 22nd, 2012 05:48 PM
09 curved head bracket fakesy Husaberg 2 August 10th, 2011 03:42 PM
Relocation Bracket... Does this look right? brandonB1 SuperMoto 0 January 9th, 2011 05:18 PM
Starter motor bracket Freaky Mechanical 0 January 24th, 2009 04:19 AM

Facebook Twitter Google+ RSS Feed