Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
October 2nd, 2004, 08:30 AM   #1
Senior Member
Joined: May 2004

Posts: 302
Thanks: 1

I Ride:
ehh.? but my sprag siezed when i was kicking it..?

my sprag siezed quite some time ago now but every one sais allways start it on the kicker in the morning i had never done this until my battery went flat hadnt been ridden for a month so i kicked it big back fire and siezed sprag so what do you do...?
my bike has allways started on the button
so what is a man to do ..?
44014 is offline  
October 2nd, 2004, 09:00 AM   #2
Senior Member
FC501EAST's Avatar
Joined: Mar 2002

Posts: 438
Thanks: 0

I Ride:
What to do??

Hi, 44014....
Ah..... Push?????
FC501EAST is offline  
October 2nd, 2004, 03:33 PM   #3
berger's Avatar
Joined: Apr 2002
From: Phoenix Arizona

Posts: 3,152
Thanks: 10

I Ride: 2010 FX450
Drop the oil and take a look for bits. There is a real good chance the sprag grenaded with that back fire. I which case you better tear her down and replace it and clean out the debris.
berger is offline  
October 3rd, 2004, 08:01 AM   #4
Senior Member
Joined: Jul 2001
From: El Sobrante, Ca. 94803

Posts: 3,249
Thanks: 1

I Ride:
Remove the small intermediate gear cove located on the forward left side of the engine. (Three small screws) Force said intermediate gear into the opposite direction of normal travel to free the sprag. You now are on borrowed moments regarding a functional "E" Start. kick only or plan for a complete lower end tear-down in the very near futute.

Hope this helps.
LINEAWEAVER is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

ehh, kicking, siezed, sprag

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
FE600 sprag clutch problems BIDMAN Mechanical 24 December 7th, 2016 08:52 AM
Clutch slave Cyl siezed FS650e05 Hubs Mechanical 2 October 6th, 2009 02:42 AM
Is the sprag clutch slipping? BM36 Mechanical 15 October 11th, 2005 11:53 PM
Overheat ?? motor siezed??? UPDATE eman369 Mechanical 21 June 10th, 2005 04:23 AM
Sprag clutch locked up BundyBear Mechanical 4 June 2nd, 2004 10:54 PM

Facebook Twitter Google+ RSS Feed