Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
January 29th, 2008, 01:08 PM   #1
Senior Member
 
Joined: Jan 2008
From: uk

Posts: 132
Thanks: 1

I Ride:
whats the difference husky 610 ?

i have chance of a mint 1995 husky 610, very cheap at 300 quid (no spark) i know they are a different cc but other than that are the engines pretty much the same I.E can you interchange most parts , i cant remember , havent looked at one close up for a long time , TAFFY?
scrapveiw is offline  
 
January 29th, 2008, 07:54 PM   #2
Member
 
Craigy's Avatar
 
Joined: Jun 2005
From: Sydney, Australia

Posts: 60
Thanks: 0

I Ride:
RE: whats the difference husky 610 ?

Very similar design to the pre 2000 'berg motor. But there are some big differences also, no balancer
and no oil pump. The lubrication of the bottom end relies on the up stroke of the piston pulling oil through the line from the sump plug. It is essential that the reed valve and crank seals seal well or the bottom end will starve for oil.

Actual size is 577cc and they make good power, they are very light but vibration is pretty bad though.

The head design looks the same but I haven't been able to compare directly. I suspect a lot of the 'berg parts will interchange. The gearbox is the same as all the late 80s husky 2 strokes just the number of teeth on the gears change. We made close ratio boxes using 125 gears.
They use an SEM ignition and I think the 95 has a Mikuni carb.
We were getting 60 hp at the wheel with just a raise in compression and some porting. Too much compression and the cases broke. The rod would stretch at high rpm and you need plenty of clearance to the valves which are 2 piece and break easily. I ran a Carillo rod but some others had titanium rods made, they were getting around 70hp.
Craigy is offline  
January 30th, 2008, 12:54 AM   #3
Senior Member
 
Joined: Jan 2008
From: uk

Posts: 132
Thanks: 1

I Ride:
RE: whats the difference husky 610 ?

my berg has no oil pump and no ballancer as it is an older one , thanks for the info .....regards ....ian
scrapveiw is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
610, difference, husky



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Husky Number9 Husaberg 5 June 7th, 2010 05:26 AM
Husaberg 650 vs Husky 610 vs Husky 570 drdfblackm Husaberg 5 April 15th, 2007 08:03 AM
Husky Dirttracker LINEAWEAVER Husaberg 2 January 1st, 2006 05:44 PM
help, no husky... mikey888 Husaberg 3 September 16th, 2005 07:34 PM


Facebook Twitter Google+ RSS Feed