Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
January 17th, 2008, 09:44 AM   #1
Member
 
Joined: Sep 2006
From: Midlands, United Kingdom

Posts: 60
Thanks: 0

I Ride:
'04 fe 450 clutch/transmission cover needed

Hello, I need a good quality second hand clutch/transmission cover for my 04 fe 450. I've been given some leads from ss racing but I thought I'd put it on here too.

I'm not going to go into things too much, but to cut a long story short after my engine was totally mangled by some f***wits, it had to be completely rebuilt by dcr and ever since has been fine, running better than ever, except for the casing leaking oil slightly.

The people responsible for wrecking my bike apparently used tyre levers to get the casing apart when taking the cover off so along with many parts that were replaced was my original cover which was fine before they got their hands on it!

Anyway Dcr used a second hand cover to keep the cost down but the only problem is, is where it appears to have been welded around the lug it is leaking oil, not loads, but enough to stop me getting through scrutineering at enduro's, passing an mot or selling the bike eventually.

So it is probably a long shot but if anyone has a decent second hand cover thats not been welded, no leaks, dodgy bearings etc, or has a knackerd engine that I could use the cover from, could you let me know.

Alternatively if anyone knows of any decent breakers, I come across two so far but haven't had time to ring yet.

Many thanks,

Steve

My current cover-





Husaberg_sTaV is offline  
 
January 17th, 2008, 12:37 PM   #2
Senior Member
 
Joined: Jan 2007
From: Central Coast NSW Australia

Posts: 390
Thanks: 0

I Ride:
RE:

Theres a set of 400/450 cases on Ebay down here in Oz for $400Au (about 240 euro) at the moment.
Says he ships worldwide but not sure what he would charge you.
Heres the link if you want to check it out further:
http://cgi.ebay.com.au/Husaberg-engine- ... dZViewItem

Coops
Coastie is offline  
January 17th, 2008, 12:39 PM   #3
Senior Member
 
Joined: Jan 2007
From: Central Coast NSW Australia

Posts: 390
Thanks: 0

I Ride:
RE:

Oops sorry ! Your a pom - about 179 pound.
Coastie is offline  
January 17th, 2008, 12:48 PM   #4
Member
 
Joined: Sep 2006
From: Midlands, United Kingdom

Posts: 60
Thanks: 0

I Ride:
Sorry if I didn't explain properly but I'm only after the clutch cover. Part number- 800.30.001.044 - clutch cover cpl.

Don't need anything else, just what is pictured.

On the '03 spare parts manual it's called a transmission cover - 220 095-02
Husaberg_sTaV is offline  
January 18th, 2008, 01:10 PM   #5
Senior Member
 
Joined: Jan 2007
From: Central Coast NSW Australia

Posts: 390
Thanks: 0

I Ride:
Sorry Steve - brain explosion !
Should have looked at the pics closer.
Coastie is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
450, clutch or transmission, cover, needed


« Why? | Bearing seal »

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch Cover? crossCANADA Husaberg 3 June 15th, 2011 04:13 AM
Clutch cover 03 vs. 04 backmouse Mechanical 3 December 9th, 2009 10:21 PM
Removal of the Transmission Cover (02 Model Bergs) drydenad Mechanical 4 April 2nd, 2007 10:01 PM
04 clutch cover on 02 501 rich501fe Mechanical 4 February 1st, 2006 08:38 AM
A bit of help needed with rocker cover inspection LeFrog Mechanical 45 January 6th, 2006 03:17 PM


Facebook Twitter Google+ RSS Feed