Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
August 27th, 2007, 02:11 PM   #1
Junior Member
 
Rett's Avatar
 
Joined: Mar 2006
From: LA California

Posts: 6
Thanks: 0

I Ride:
Who can balance my crank in Los Angeles Ca.

I have a 01 fc 550 need the crank balanced, because I removed the balancer. It seems that knowbody in the area wants to do it. Please Help! Thanks, Rett
Rett is offline  
 
August 27th, 2007, 02:24 PM   #2
Moderator
 
Joined: Oct 2002
From: Sunland, CA

Posts: 3,117
Thanks: 19

I Ride:
Try contacting Eric's in Pasadena, Ca +656-449-ERIC.

I had my 94 501 crank balanced when I had Eric's rebuild it. Give them a holler and tell them Dale Covington sent you.
DaleEO is offline  
August 30th, 2007, 05:08 AM   #3
Member
 
mars's Avatar
 
Joined: Jun 2004
From: denton texas

Posts: 77
Thanks: 6

I Ride: 2010 KTM250SX, 2001 Husaberg FC550
Try Pete at Powroll. www.powroll.com 5419231290

mars
mars is offline  
August 30th, 2007, 05:26 PM   #4
Junior Member
 
Rett's Avatar
 
Joined: Mar 2006
From: LA California

Posts: 6
Thanks: 0

I Ride:
THANKS!!! I HAD ERIC'S SEND IT OUT TODAY!!!
Rett is offline  
December 13th, 2007, 01:01 PM   #5
Member
 
mars's Avatar
 
Joined: Jun 2004
From: denton texas

Posts: 77
Thanks: 6

I Ride: 2010 KTM250SX, 2001 Husaberg FC550
Crank rebuild/balancing

Powroll had rebuilt/rebalanced my 2001 crank (60% factor) w/o counter balancer. Their work came out fine. The motor is running fine on roller bearings (16mm). I am thinking about going back to the ball bearings on the next tear-down (50hrs) of the motor. Powroll. www.powroll.com 5419231290 .

mars
mars is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
angeles, balance, crank, los



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Crank Welding / rebuild / balance bushmechanic Mechanical 0 March 1st, 2010 09:24 PM
crank locking bolt and crank twist bushmechanic Mechanical 25 February 6th, 2009 12:02 PM
crank pin fitment and crank twist especially on the 650's! Taffy Mechanical 2 November 7th, 2008 03:41 PM
4.6 and 8.8 out of balance? mark550fc Suspension 19 August 17th, 2006 01:57 PM
Supermoto USA, NW Series 4/23-4/24, Port Angeles Speedway ronwest99 Husaberg 0 April 13th, 2005 08:11 AM


Facebook Twitter Google+ RSS Feed