Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
September 1st, 2004, 06:20 AM   #1
Junior Member
Joined: Aug 2002
From: Ohio, USA

Posts: 29
Thanks: 0

I Ride:
2002 fc470e inspection

Due to an injury, my season is over. I thought this would be a good time to check the rocker bearings etc. The bike has 22.5 hours. I removed the cover and all looks brand new. No marks on cam or bearings, no movement in bearings other than the required lateral spec., cam sprocket looks new etc.. Is it a waste of time and money to replace the rocker bearings? Thanks is advance for your opinions

lesmoto is offline  
September 1st, 2004, 06:35 AM   #2
berger's Avatar
Joined: Apr 2002
From: Phoenix Arizona

Posts: 3,150
Thanks: 9

I Ride: 2010 FX450
Since you are there I would install the updated rockers at least.
berger is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

2002, fc470e, inspection

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
02` FC470E Engine total breakdown F¤/%&¤"#¤#% Theduckllr Mechanical 6 May 18th, 2006 11:33 PM
A bit of help needed with rocker cover inspection LeFrog Mechanical 45 January 6th, 2006 03:17 PM
25 hours +inspection 650 2004 madero Mechanical 0 June 4th, 2005 07:40 AM
2002 Fe 400 - Cam Chain Inspection jmumme Husaberg 2 November 27th, 2004 11:17 PM
carb tuning a '02 fc470E risky1 Fuel 7 November 23rd, 2004 08:20 PM

Facebook Twitter Google+ RSS Feed