Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
March 6th, 2007, 02:12 AM   #1
Member
 
Proemer's Avatar
 
Joined: Aug 2004
From: Amsterdam

Posts: 38
Thanks: 0

I Ride:
Screws/nuts going loose and loosing them...

Question, I have this 2004 FE501 for little over a year now (bought new) and for about the sixt time some srew/nut/bolt came of the bike! Is that 'normal' for the KTM built Husabergs (never experienced this with my 470). Or might there be some other reason for it..? (e.g. some vibration in the bike due to a disbalance in the engine, which causes srews to shake out..?)

Maybe some of you have some experience with this.

Thanks again and goodbye!

Proemer
Proemer is offline  
 
March 6th, 2007, 02:12 PM   #2
Senior Member
 
Joined: Sep 2006
From: townsville australia

Posts: 174
Thanks: 0

I Ride:
RE: Screws/nuts going loose and loosing them...

yeah it happens on just about every bike I've ever had. Threadlocker or loctite is your friend in that department.
ferret is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
loose, loosing, screws or nuts



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
loosing engine oil 2011 husaberg 570 titan Mechanical 3 August 10th, 2012 09:34 PM
oil breather, loosing oil RejekzNoodles Mechanical 29 January 22nd, 2012 11:47 AM
Seriously, how big are my nuts? (Axle nuts! FE390) Garrison Mechanical 1 January 17th, 2011 09:35 AM
Tank Screws clark1 Fuel 6 November 25th, 2010 03:22 PM
loosing coolant Ammo Husaberg 2 December 11th, 2004 07:16 AM


Facebook Twitter Google+ RSS Feed