Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
February 25th, 2007, 09:38 AM   #1
Joined: Jan 2007
From: chester england

Posts: 71
Thanks: 0

I Ride:
tuned 650fe help just striped the head

had a leak from the head gasket so took the head off to replace the gasket and as i looked closer found out the engin has been tuned,i have oversize valves and ported head also an oversized piston and bore would this explaine why starting is dificult and running at low revs is lumpy and chugs alot as if beeing fuel starved but about half throttle is pulls like a train.when i set the mixture screw it will only increase the revs when the screw is only half a turn out and not the standard two and a half but im afraid of running it to lean so have it at two turns out the plug indicates rich mixture so what should i do?carb is standard phm40 all standard jets and settings on the needle.this bike was baught suposidley as standard 2003.i might sell it if i cant sort the running out so if some one wants one in the uk email me
wesh155 is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

650fe, head, striped, tuned

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
tuned berg 650 and i want it faster any help ??? topo Mechanical 33 May 24th, 2011 12:55 PM
tuned down for green sticker on 2010 fe390's? hipsterdufus Husaberg 4 November 14th, 2009 09:21 AM
05 650fe efi pitt7542 Fuel 2 June 23rd, 2008 03:22 AM
2003 650fe BelgiqueBasterd Husaberg 5 October 6th, 2006 01:10 AM
02 650FE For Sale ajt Husaberg 1 July 19th, 2005 06:16 PM

Facebook Twitter Google+ RSS Feed