Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 18th, 2004, 11:50 AM   #1
Member
 
Joined: Dec 2002
From: Scotland

Posts: 39
Thanks: 0

I Ride:
Gear selector drum position

Hi guys, need some more help, at the moment I'm rebuilding my engine after replacing all the bearings. Thouble is the manual instructs that one of the pins on the selector drum (the pins that locate the selector star) should have a flat end, and this pin when positioned towards the front of the engine puts the selector drum in the neutral position. My problem is none of the pins on my selector drum have a flat top . Is there any other way of ensuring the drum is in the neutral position so I can rebuild it with the gear cluster in neutral.
I know, I know, I should have marked it before I dismantled it, but hindsight is always 20-20
yoshie is offline  
 
July 18th, 2004, 01:39 PM   #2
Senior Member
 
Simon's Avatar
 
Joined: Jun 2001
From: Berkshire, England

Posts: 1,453
Thanks: 3

I Ride:
Are they all the same length? On both my bikes the pin you are refering to is ever so slightly shorter than the others. Double check because it is not always apparent.

Have a look and let us know.

Cheers,
Simon
Simon is offline  
July 19th, 2004, 12:28 AM   #3
Senior Member
 
Joined: May 2004
From: Germany

Posts: 304
Thanks: 0

I Ride:
Hi yoshie,

if you are not sure if it´s the right position,
try tro find neutral and test it by rotating the
transmission shafts if you got neutral. First
you can try to get 1st gear, after that you turn
the drum a half position in left direction.
Then you must have neutral and you can fix
the positioning star.

greetings

hribman
hribman is offline  
July 24th, 2004, 06:20 AM   #4
Member
 
Joined: Dec 2002
From: Scotland

Posts: 39
Thanks: 0

I Ride:
Originally Posted by Simon
Are they all the same length? On both my bikes the pin you are refering to is ever so slightly shorter than the others. Double check because it is not always apparent.

Have a look and let us know.

Cheers,
Simon
Simon, your right, one pin is slightly shorter than the rest, that'll be the one to set it up with.

hribman, I'll check it that way one the crankcases are together

Thanks guys

Yosh
yoshie is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
drum, gear, position, selector



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gear selector drum (fixed!) BelgiqueBasterd Mechanical 29 February 18th, 2014 01:17 PM
Snapped Gear Selector abclint Mechanical 7 March 19th, 2010 03:15 AM
Selector Drum mito Mechanical 2 February 11th, 2009 01:17 AM
Cam gear position vs main gear after kick mechanism change p_kerttu Mechanical 16 June 29th, 2007 10:22 AM
selector drum shoulder wear Taffy Mechanical 6 June 30th, 2005 10:28 AM


Facebook Twitter Google+ RSS Feed