Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
June 26th, 2006, 08:19 AM   #21
Junior Member
 
BIDMAN's Avatar
 
Joined: Aug 2006
From:

Posts: 11
Thanks: 0

I Ride:
Re: FE600 sprag clutch problems

Hi, on the bottom of page 13 on the left it shows another cable coming from the back of where the kick starter is. On the back of my engine casing at the same point it is all sealed, there are no openings or bolt holes.
The auto decomp mounted on the cam shaft is on mine as I remember seeing it when I stripped the bike down.
I will look into getting hold of the parts for the handle bar mounted decomp system that you have mentioned as I think this would help a great deal. Thanks for all your help, Dan
BIDMAN is offline  
 
June 26th, 2006, 08:45 AM   #22
Senior Member
 
JoeUSA's Avatar
 
Joined: Jun 2001
From: Pasadena Ca.

Posts: 1,355
Thanks: 0

I Ride:
Re: FE600 sprag clutch problems

Originally Posted by BIDMAN
Hi, on the bottom of page 13 on the left it shows another cable coming from the back of where the kick starter is. On the back of my engine casing at the same point it is all sealed, there are no openings or bolt holes.
The auto decomp mounted on the cam shaft is on mine as I remember seeing it when I stripped the bike down.
I will look into getting hold of the parts for the handle bar mounted decomp system that you have mentioned as I think this would help a great deal. Thanks for all your help, Dan
Hi Dan,

You said "The bottom of page 13 on the left it shows another cable coming from the back of where the kick starter is".

You do not need those parts.

Like I said, item 59 wears down, becomming ineffective. Much more effective ones have been designed and incorporated into the late models.

Good luck,

Joe
JoeUSA is offline  
June 26th, 2006, 08:48 AM   #23
Moderator
 
ned37's Avatar
 
Joined: Dec 2004
From: back in cottonwood, az

Posts: 2,393
Thanks: 217

I Ride: '08 HUSKY te610
Re: FE600 sprag clutch problems

hi,
the cable coming from the back of the kickstarter was not included on the e start models of that vintage. as some have said, it is redundant anyhow. on my kickstart fe400, with the cable, and no handlebar lever, i can adjust it so it doesn't work and can feel compression when kicking if compression happens to be close to the start of the kick. this is because the cam release is dynamic, has to be moving to work, and my wimpy left leg needs all the help it can get. if you get a good kick at it, and in different locations thats impossible, its ok. based on my experiences with my 98 fee, a handlebar mounted release would be an asset.

ned
ned37 is offline  
June 26th, 2006, 08:57 AM   #24
Junior Member
 
BIDMAN's Avatar
 
Joined: Aug 2006
From:

Posts: 11
Thanks: 0

I Ride:
Re: FE600 sprag clutch problems

Hi, ok, thanks for the extra information . Just wondering if anybody has a pictuer of part 25, as I am a welder/fabricator by trade and should be able to sort 1 out for myself. As for the handle bar mounted puller I have a seperate decomp puller from a differnt bike which will do the job just as well. The reason for making one myself is its much cheaper and I would have to wait at least 2 weeks for 1 to be ordered in, if anybody does have any pictures of the part 25 please post it here, thanks Dan
BIDMAN is offline  
December 7th, 2016, 08:52 AM   #25
Junior Member
 
Joined: Dec 2015
From: Corrales New Mexico

Posts: 6
Thanks: 0

I Ride: Dirt bikes x12 Street bikes x4
Buy parts? 1998 hbg fx600e sprag and mate

240245-01 and 240247-01 ... any hints on how to procure parts asap?

John Klosterman...johnkl at comcast
jklosterman is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
clutch, fe600, problems, sprag



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
94 fe600 jumping out of gear/clutch slipping keeperlit Mechanical 3 June 9th, 2008 01:43 PM
Clutch Problems???? narkotik666 Mechanical 5 April 24th, 2007 11:48 PM
Clutch Problems???? narkotik666 Mechanical 4 March 20th, 2007 03:53 PM
Is the sprag clutch slipping? BM36 Mechanical 15 October 11th, 2005 11:53 PM
Sprag clutch locked up BundyBear Mechanical 4 June 2nd, 2004 10:54 PM


Facebook Twitter Google+ RSS Feed