Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
May 24th, 2006, 09:41 AM   #1
Junior Member
 
Joined: Mar 2006
From: Rochester, NY

Posts: 29
Thanks: 0

I Ride:
oil filter cover orings

Hi, I'm sure this is elsewhere on the site, but with my lunchbreak coming to an end, I still don't have an answer and my bike sits sadly in the garage.

What size are the orings for the top oil filter cover (for lack of a better term)?
The inside one was worn, and it got pinched in two last oil change. Probably should have replaced them last time.

At any rate, the bikes sits, and I've been bicycling for a few days.
The bike's a '98 fee501.

Thanks,
Tim
seaweed is offline  
 
May 24th, 2006, 02:06 PM   #2
Senior Member
 
Joined: May 2002
From: Snowy Mountains NSW Australia

Posts: 1,591
Thanks: 128

I Ride:
Re: oil filter cover orings

Take your cover and old o ring to your local bearing supplier and you'll get a stack of them for 20c each. At least here in Oz thats how it works.

Steve
steve is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
cover, filter, oil, orings



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Leaking oil filter cover squamishberg Mechanical 1 May 17th, 2013 05:59 PM
Leak from oil filter cover petem Mechanical 3 August 16th, 2010 05:35 PM
Oil filter cover bolt is going nowhere. Nowhere. schwim Mechanical 13 April 28th, 2007 04:21 PM
Air filter cover Ady Husaberg 3 January 27th, 2005 08:07 PM
Valve cover/ rocker ccover /head cover BD Mechanical 5 August 18th, 2004 11:08 AM


Facebook Twitter Google+ RSS Feed