Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
May 18th, 2006, 07:56 AM   #1
Junior Member
darko1307's Avatar
Joined: Apr 2006
From: croatia

Posts: 2
Thanks: 0

I Ride:
front brake

How big is piston of that Brembo master cylinder on fs650 02. I am consider to fit 14 mm brembo from ducati for better stopping

Also I am assembling that rear brake pedal and can not set that spring!!
How is that assembled right I can't figure it out
darko1307 is offline  
May 19th, 2006, 04:46 PM   #2
Senior Member
Joined: Aug 2005
From: Waterville,Nova Scotia

Posts: 209
Thanks: 0

I Ride:
Re: front brake

I don't know anything about the first but I just took my brake pedal off to grease it and found the easiest way to hook it back up was to take off the lower chain roller/brake spring stop assembly then install the pedal with the wound part of the spring over the collar and the 90 degree part of the spring over the pedal to the rear of the pivot.Then push up on the straight part of the spring pointing toward the front of the bike and push the stop/roller assembly up under it and slide the bolt in.
ford832 is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

brake, front

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Please help - locking front brake husmar Husaberg 12 October 3rd, 2011 06:13 PM
Front brake ben_moto501 Husaberg 3 July 10th, 2011 12:17 AM
Front brake for supermoto Lanttola Wheels and Tires 3 January 19th, 2011 09:35 AM
front brake improvemment whosahberg Husaberg 2 January 24th, 2006 02:07 AM
front brake-more needed Taffy Wheels and Tires 15 March 6th, 2005 02:37 AM

Facebook Twitter Google+ RSS Feed