Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
April 20th, 2006, 02:43 PM   #1
Member
 
sirsumm's Avatar
 
Joined: Mar 2006
From: Missoula, MT

Posts: 47
Thanks: 0

I Ride:
Valves

Has ayone here had to replace valves in their older (95) engines? Where is the best place to order them?
sirsumm is offline  
 
April 21st, 2006, 06:12 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,426
Thanks: 399

I Ride: Husaberg FE501e 2003
Re: Valves

try dan for motoexotica. yes many have done them. send a PM to DEZDUSTER. he'll help.

regards

Taffy
Taffy is offline  
April 21st, 2006, 08:06 AM   #3
Senior Member
 
LINEAWEAVER's Avatar
 
Joined: Jul 2001
From: El Sobrante, Ca. 94803

Posts: 3,249
Thanks: 1

I Ride:
Re: Valves

Originally Posted by sirsumm
Has ayone here had to replace valves in their older (95) engines? Where is the best place to order them?
All the time for various clients.
One piece high quality SS. Exceeds OEM.

HSBG4ME@AOL.COM
510 223-9052

Dale
LINEAWEAVER is offline  
April 22nd, 2006, 08:04 AM   #4
Member
 
sirsumm's Avatar
 
Joined: Mar 2006
From: Missoula, MT

Posts: 47
Thanks: 0

I Ride:
Re: Valves

Is it possible to grind the valves if they are not burned very badly? If so, could I grind the valves, then lap them into the seats? I work in a machine shop, and could very easily do the machine work if this is a possibility.
sirsumm is offline  
April 22nd, 2006, 08:08 AM   #5
Senior Member
 
LINEAWEAVER's Avatar
 
Joined: Jul 2001
From: El Sobrante, Ca. 94803

Posts: 3,249
Thanks: 1

I Ride:
Re: Valves

Originally Posted by sirsumm
Is it possible to grind the valves if they are not burned very badly? If so, could I grind the valves, then lap them into the seats? I work in a machine shop, and could very easily do the machine work if this is a possibility.
Yes, BUT!

You will likely find your inlet valves severely cupped.
In order to remove cupping via grinding, the valve margin
will become quite thin and consequently result in
a much reduced service life.

Dale
LINEAWEAVER is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
valves



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ti valves Taffy Mechanical 5 May 27th, 2009 10:26 AM
09 valves pollo Mechanical 1 July 19th, 2008 09:27 AM
how to set the valves SPAIN-BERG Mechanical 21 July 6th, 2006 10:23 AM
valves BOSS Mechanical 4 January 6th, 2006 10:16 PM
how to set the valves SPAIN-BERG Fuel 21 December 31st, 1969 04:00 PM


Facebook Twitter Google+ RSS Feed