Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
March 7th, 2006, 10:09 PM   #1
Member
 
cwalkin's Avatar
 
Joined: Jan 2006
From: australia

Posts: 75
Thanks: 0

I Ride:
filter housing

hey guys.
just reading my owners manual and noticed in the oil change section that it states : LAY THE MOTORCYCLE DOWN AND FILL FILTER HOUSING HALF FULL WITH OIL THEN INSERT FILTER,,,
i tried this as i just changed filter and the oil didnt stay in housing,,!

does anybody even do this?

2005 fe450

cheers
Attached Thumbnails
filter housing-pipe2c.jpg   filter housing-pipe1c.jpg   filter housing-pipe3c.jpg  
cwalkin is offline  
 
March 7th, 2006, 11:16 PM   #2
Senior Member
 
rancheroracer's Avatar
 
Joined: Apr 2005
From: Rodeo, California

Posts: 134
Thanks: 0

I Ride:
Re: filter housing

I don't, I guess one would have to insert the filter slow enough to let the oil run into it? I just kick over several times with comp. release pulled after the oil change, don't know if it does any good, but it makes me feel better about not putting oil in the filter housing.
rancheroracer is offline  
March 8th, 2006, 12:34 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,308
Thanks: 383

I Ride: Husaberg FE501e 2003
Re: filter housing

the idea is that the oil should be instantly there after an oil change. howeve, besides the rings there isn't a part in that engine that wouldn't last 20 minutes on idle (tickover) without an oil pump. it really is over cautious and i wouldn't worry about it. your engine will be under full pressure after about 1 second.

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
filter, housing



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
02 FC550 blowing radiator hose off of water pump housing olpace Cooling Systems 17 July 2nd, 2012 05:36 AM
thermostat housing johny Husaberg 0 August 15th, 2010 02:22 AM
Oil in the flywheel housing BelgiqueBasterd Mechanical 2 September 19th, 2007 01:44 PM
What is the odd crud in my filter housing? chilledspode Mechanical 2 July 30th, 2007 08:01 PM
Oilfilter housing problems Sperstad Mechanical 3 September 23rd, 2006 09:24 AM


Facebook Twitter Google+ RSS Feed