Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
April 27th, 2004, 02:08 PM   #1
Senior Member
JoeUSA's Avatar
Joined: Jun 2001
From: Pasadena Ca.

Posts: 1,355
Thanks: 0

I Ride:
Silicon Nitride cam followers

Hi Dale,

How are the tests and parts comming along?

JoeUSA is offline  
April 27th, 2004, 05:25 PM   #2
Junior Member
Joined: Dec 2003
From: New Zealand

Posts: 29
Thanks: 0

I Ride:
I have been looking at silicon nitride for a different application (piston rings for a prototype two stroke engine) and it has a low fracture toughness, for the inlet this would be fine but it could be a problem with the automatic decompressor in the exhaust lobe.
Cheesy is offline  
April 28th, 2004, 08:50 PM   #3
Senior Member
Joined: Jul 2001
From: El Sobrante, Ca. 94803

Posts: 3,249
Thanks: 1

I Ride:
Hi Joe,
I have the working prototypes and now simply need to make time for testing.

Based on early calculations the de-comp cam should pose little trouble.
We shall see

Best Regards,
LINEAWEAVER is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

cam, followers, nitride, silicon

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
worn followers in my 650 -02, what to do? help! Zeri- Mechanical 5 May 10th, 2009 11:03 AM
Silicon in oil screen peterolsson Mechanical 2 February 18th, 2008 12:34 AM
Dick's Racing APS vs. Titanium Nitride fork leg coating Sean Suspension 3 April 23rd, 2007 05:20 PM

Facebook Twitter Google+ RSS Feed