Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
November 18th, 2021, 02:40 PM   #1
Junior Member
Joined: Apr 2017
From: OR

Posts: 2
Thanks: 0

I Ride:
2010 FE450 Supermoto project

After 265 hours the 70 degree started burning some oil due to a leaking valve seal. My machinist actually also mentioned the valves and rings were a bit tired as well so I decided to do a refresh. Some pics of the progress...A Wossner piston will be used along with a JD jetting fuel programmer. Cam will be original 450 for now.
Attached Thumbnails
2010 FE450 Supermoto project-img_20211118_143429.jpg   2010 FE450 Supermoto project-img_20211118_143424.jpg   2010 FE450 Supermoto project-img_20211118_143417.jpg   2010 FE450 Supermoto project-img_20211118_143413.jpg   2010 FE450 Supermoto project-img_20211118_143408.jpg  

2010 FE450 Supermoto project-img_20211118_143404.jpg   2010 FE450 Supermoto project-img_20211118_143400.jpg  
trm122 is offline  
November 19th, 2021, 08:59 AM   #2
Senior Member
Joined: Nov 2001
From: Ely, England

Posts: 16,542
Thanks: 620

I Ride: Husaberg FE501e 2003
Taffy is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

2010, fe450, project, supermoto

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: 2010 FS570 and 2010 FE450 for Sale risky1 Classifieds 3 September 2nd, 2018 10:47 PM
550 Supermoto project pollo SuperMoto 6 May 9th, 2017 07:23 PM
For Sale: 2010 FE450 dirt and SUPERMOTO SETUP fishheadback Classifieds 6 February 21st, 2016 08:37 PM
HUSABERG FE450 SUPERMOTO gemzsi1234 Husaberg 3 February 13th, 2011 06:22 PM
FS 570 Supermoto 2010 mechanix SuperMoto 2 July 3rd, 2009 01:44 PM

Facebook Twitter Google+ RSS Feed