Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Thanks Tree1Thanks
Reply
 
LinkBack Thread Tools Display Modes
October 24th, 2021, 12:06 AM   #11
Junior Member
 
Joined: Oct 2021
From: Suomi

Posts: 8
Thanks: 0

I Ride:
So i found the main bearing. Its the same as ktm's etc use. Can i just left balancer on the table and put it back together?
Jimppaa is offline  
 
October 30th, 2021, 07:26 AM   #12
Junior Member
 
Joined: Oct 2021
From: Suomi

Posts: 8
Thanks: 0

I Ride:
So i got the bearing and put the engine back together without balancer.

Now the issue is i cant get it to run. E-start has been always bad, but it spins the engine better than the kickstarter??

If i try to kickstart it, its veryvery stiff so its impossible to get enough speed to make it run. Same thing even if i take the plug out.
Whats the problem?? Auto decompressor looks fine so its not about it.

Engine spins ok with wrench. Timing etc is right.
Jimppaa is offline  
November 2nd, 2021, 04:08 AM   #13
Junior Member
 
Joined: Oct 2021
From: Suomi

Posts: 8
Thanks: 0

I Ride:
The problem is finally solved. My cases were put together too tight so the crank didnt spin easily enough. Its kinda stupid system there is no gasket between the cases.

Had also problems with the sprague, it just kept slipping and slipping so i took it apart and did the tricks with the spring. Found new spring from volvo v70s transmission seals. There is now double springs and its working fine.
Jimppaa is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
engine, fe450, stuck



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't shift down sometimes FE450 -06 (550 -03 engine) TheTaXUS Mechanical 2 September 5th, 2018 08:07 AM
04 fe450 engine sound Simas Mechanical 6 July 16th, 2018 03:02 PM
FE450 '05 engine problem... 640 Armageddon Husaberg 6 May 23rd, 2012 08:48 AM


Facebook Twitter Google+ RSS Feed