Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
September 6th, 2021, 02:36 PM   #1
Member
 
Joined: Dec 2018
From: New Zealand

Posts: 31
Thanks: 1

I Ride: 2001 Husaberg FE650
Shock bearing kit?

Got the rear shock out of my -02 FE650, seems like most of it hasn't been serviced for a while, the oil was a brown sludge (is that normal?), the seals were pretty flat and one side of the top shock bushing fell out when I took the shock out.
Got the new seals, but having a hard time finding top and bottom shock bushing. Has anyone else managed to find some that would fit an -02 FE650?
Also what oil do you guys put in there?

Cheers
Springarn is offline  
 
September 7th, 2021, 03:02 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,554
Thanks: 626

I Ride: Husaberg FE501e 2003
hello

You need 2.5W all shocks are the same.

I sell the quad rings, The seal heads and the top and bottom heim (spherical bearings) that you want. I also sell the shock shaft bush and you ought to get a rebound O ring if you are stripping it. well there are two/three O rings you need to get. but that bottom O ring for the rebound is to stop it rusting up. it takes a special 22mm (i think?) tool to undo the bottom nut on the shock shaft. once the shock shaft is off you can do the rebound O ring and stop it seizing.

100662 and 100679

cheers

Taffy
Taffy is offline  
October 4th, 2021, 07:27 PM   #3
Member
 
Joined: Dec 2018
From: New Zealand

Posts: 31
Thanks: 1

I Ride: 2001 Husaberg FE650
Answering one of my own question for anyone else in the same situation: All Balls racing part nr 29-5056 (lower shock bearing kit) fits a FE650 -02.
Springarn is offline  
October 5th, 2021, 01:05 AM   #4
Junior Member
 
Joined: Jul 2016
From: Leipzig

Posts: 26
Thanks: 2

I Ride: FE 600 2000
Why do you want to use All Balls Bearings when the original KTM part is still available?

e.g. lower bushing
https://www.neubert-racing.com/husab...stossdaempfer/

Pos. 11
Bezeichnung KUGELGELENKLAGER KGW 16X32X21
Artikelnummer 000036492
Marke Husqvarna / Husaberg
Teilenummer 50180179
Preis 31.50 EUR inkl. Mwst zzgl. Versandkosten
Duc851 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
bearing, kit, shock



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2003 husaberg fe501 rear upper shock bearing Fe501rich Mechanical 1 January 5th, 2020 05:28 AM
shock lower bearing part numbers? 76model Suspension 1 October 15th, 2017 06:08 AM
Upper shock bearing 400psi Suspension 0 November 25th, 2016 07:20 PM
shock/swingarm bearing kits 05 fe550 jimmythehat Suspension 5 December 26th, 2013 02:25 AM
FE 400-broken shock bearing tuflek Mechanical 7 December 16th, 2004 10:25 AM


Facebook Twitter Google+ RSS Feed