Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
April 1st, 2021, 09:39 AM   #1
mdp
Junior Member
 
Joined: Jun 2010
From: uk

Posts: 14
Thanks: 2

I Ride:
2001 550 Engine rebuild

Evening all

Got a 2001 550 in to rebuild after a bearing failure, just in the process of getting a parts list together

If anybody can help with the following it would be greatly appreciated
Mainly relating to interchangeability between the 01-03 Bergs and the 04-08 KTM Bergs

cylinder liner 200 241-01 = 81530005000?
piston 200 246-01 = 100mm 04-08 piston?
rod 210 191-01 = 80030015000 listed as not available, alternative supplier?
Counter balance assembly 80030057000?
balance shaft 210 160-01 = 80030059000?
timing gear 200 043-01 = 80036037000?
washer 230 040-01 not used with above?
timing chain?
clutch hub 230 006-01 = 59032002500?

More to follow I'm sure
Thanks in advance
mdp is offline  
 
April 1st, 2021, 11:56 PM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,417
Thanks: 582

I Ride: Husaberg FE501e 2003
"2001 550. rebuild after a bearing failure

cylinder liner 200 241-01 = 81530005000?
piston 200 246-01 = 100mm 04-08 piston?
rod 210 191-01 = 80030015000 listed as not available, alternative supplier?
I MAKE A ROD KIT FOR THIS BIKE https://www.taffmeisters.co.uk/advan...tion=1&x=0&y=0
Counter balance assembly 80030057000?
I MAKE BALANCER BEARINGS FOR THIS ASSEMBLY. https://www.taffmeisters.co.uk/produ...oducts_id=1285
balance shaft 210 160-01 = 80030059000?
HAVE A LOOK AT THIS SHAFT. IF IT IS JUST ONE DIAMETER IT IS A TRUE 2001 AND YOU MUST STICK WITH 2001 PARTS AND NOT MIX THEM WITH ANY OTHER AGE. I HAVE NEW 2001 ONES https://www.taffmeisters.co.uk/produ...oducts_id=2804
timing gear 200 043-01 = 80036037000?
A FINISHED ITEM. YOU MIGHT FIND ONE BUT I HAVE THEM. https://www.taffmeisters.co.uk/produ...roducts_id=385 PEOPLE SWOPPED CAMS SO THE ALIGNMENT IS SOMETHING I ALWAYS CHECKED ANYWAY.
washer 230 040-01 not used with above? TOO WIDE. THE CAMCHAIN PLATES CATCH IT.
timing chain?
66 LINK https://www.taffmeisters.co.uk/produ...oducts_id=2429
clutch hub 230 006-01 = 59032002500?

More to follow I'm sure"


I'm sure if you let me take the worry of getting it right off you you'd get all the right parts and the jobs done. if genuine trade enquiry I can do something off for sure.....the walls have ears!

cheers

Taffy

Last edited by Taffy; April 2nd, 2021 at 12:00 AM.
Taffy is offline  
April 3rd, 2021, 04:02 AM   #3
mdp
Junior Member
 
Joined: Jun 2010
From: uk

Posts: 14
Thanks: 2

I Ride:
OK thanks
I will most likely contact you directly when I have a complete list
mdp is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
2001, 550, engine, rebuild



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
2001 FE650E basket case - rebuild mx563 Husaberg 27 November 20th, 2017 11:57 PM
Full engine rebuild of fe 650e 2001 nosense290 Mechanical 2 July 4th, 2014 06:40 AM
Tools for fe 450 engine rebuild tumpelo Mechanical 4 January 28th, 2012 11:01 AM
My engine rebuild DaleEO Mechanical 33 November 7th, 2008 04:37 AM
Engine Rebuild BelgiqueBasterd Mechanical 2 November 8th, 2006 09:35 AM


Facebook Twitter Google+ RSS Feed