Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
March 2nd, 2021, 03:15 PM   #1
Member
 
Joined: Oct 2020
From: Portugal

Posts: 34
Thanks: 0

I Ride:
Contra rolamentos de balanço

É normal os rolamentos entrar a sim no contra balanço ?
ou apresenta muito desgaste ?
ou é normal do contrapeso ser de material de dureza com o rolamento de dureza
ver vídeos.




Xinasa is offline  
 
March 3rd, 2021, 04:56 AM   #2
Member
 
Joined: Oct 2020
From: Portugal

Posts: 34
Thanks: 0

I Ride:
Does anyone say anything be normal or do they take glue on the bearings?
Xinasa is offline  
March 3rd, 2021, 10:27 AM   #3
Member
 
Joined: Oct 2020
From: Portugal

Posts: 34
Thanks: 0

I Ride:
Help want to close my engine
Xinasa is offline  
March 5th, 2021, 09:09 AM   #4
Junior Member
 
Joined: Jul 2015
From: Germany

Posts: 15
Thanks: 9

I Ride:
Hi, no glue - until 2005: bearings are pressed in, later versions are laser-wellded!!
Weight and bearrings = one piece

Maybe there is glue whichs stands the heat, etc.
Bergfest is offline  
March 6th, 2021, 01:39 AM   #5
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,417
Thanks: 582

I Ride: Husaberg FE501e 2003
the glue is called "bearing lock" but it must be left to go hard and also is it really designed to make up for a clear (major) problem?

There's some guys in the UK that spray material and then bake it on crank spindles and gearbox shafts etc. that coating is PERMANENT. This is a case for this job. I wouldn't trust just bearing lock.

I still run the advert.
https://www.taffmeisters.co.uk/advan...tion=1&x=0&y=0

regards

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
balanço, contra, rolamentos



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
rolamentos câmera Xinasa Mechanical 1 February 11th, 2021 12:11 AM


Facebook Twitter Google+ RSS Feed