Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
February 28th, 2021, 07:52 AM   #1
Member
 
Joined: Nov 2019
From: Warszawa

Posts: 46
Thanks: 4

I Ride: HUSABERG FC 600 98 HUSABERG FC 600 00 Husqvarna Tc 610 94 husaberg fe 501 93 ,Honda Crf 450 04
husaberg fc 600 00 problem with 4th gear

Hi everyone, I have a problem with my husaberg, the point is that there is a problem with the 4th gear as I go, sometimes it jumps in this gear and I wonder if it's a problem with the clutch or the gearbox? , I will add that when I put the engine together, I did not give the washer that was in the box because I did not know where it was, gentlemen, what do you think is the reason I have a 4-speed gearbox?
gamer3210 is offline  
 
February 28th, 2021, 09:49 AM   #2
Senior Member
 
Joined: Jul 2019
From: southwest

Posts: 115
Thanks: 17

I Ride: 99 FE501e, FX600e, FC501
I think you need to take it back apart, inspect, and properly assemble
heidenberg is offline  
March 1st, 2021, 01:43 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,417
Thanks: 582

I Ride: Husaberg FE501e 2003
two things always worth checking are;

1. where is the selector star? did I put it back right? I would take the star off and mimmick the gearchanges. 1st, neutral, 2nd, 3rd, 4th. I'd want neutral to be very, very clear and easy to engage. no half 5ths either would be another.

2. the selector claw jams on them. look for burrs. two on the base claw and 2 on the too-and-fro claw. just gently chamfer the edge of the plate so that the two plates can move freely over each other.

I very much doubt you did anything wrong in the gearbox.

regards

Taffy
Taffy is offline  
March 1st, 2021, 10:36 AM   #4
Member
 
Joined: Nov 2019
From: Warszawa

Posts: 46
Thanks: 4

I Ride: HUSABERG FC 600 98 HUSABERG FC 600 00 Husqvarna Tc 610 94 husaberg fe 501 93 ,Honda Crf 450 04
I also noticed that the gears sometimes go hard, but I know little about the gearbox
gamer3210 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
4th, 600, gear, husaberg, problem



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Like New Husaberg Gear panosass Husaberg 0 September 5th, 2017 06:08 AM
FE400 Gearbox problem - 4th gear jumps to 3th zaga Mechanical 2 June 5th, 2013 05:37 AM
kick gear problem gotlund Mechanical 2 May 31st, 2010 11:34 AM
Gear box problem mikst Mechanical 1 June 25th, 2006 01:42 AM
gear lash problem? BILLTECH Mechanical 0 November 29th, 2005 03:00 PM


Facebook Twitter Google+ RSS Feed