Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
February 10th, 2021, 06:54 PM   #1
Member
 
Joined: Oct 2020
From: Portugal

Posts: 38
Thanks: 0

I Ride:
Shift drum

As I ride the gearbox cambor gives several positions wanted to meter as it is original see the image the manual I am not able to explain very well

help please !
Attached Thumbnails
Shift drum-tambor-de-modancas-.jpg   Shift drum-tambor-de-modancas1-.jpg   Shift drum-estrela-.jpg   Shift drum-estrela-fora-.jpg  
Xinasa is offline  
 
February 11th, 2021, 01:10 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,539
Thanks: 619

I Ride: Husaberg FE501e 2003
you see picture 2? you want the dot above that a little. at say between 2-3 o' clock (you are at 3-4 o' clock). you must then have the engine horizontal and you will be able to spin the output separate from the input.

this is neutral.

the star is then easy.

Taffy
Taffy is offline  
February 11th, 2021, 05:20 AM   #3
Member
 
Joined: Oct 2020
From: Portugal

Posts: 38
Thanks: 0

I Ride:
The bike was on, but working was hard to get into neutral. thought it was because of the position of the drum or the star.

He hitched the bike working at 1 speed then always passed to the 2 almost could not go neutral
Attached Thumbnails
Shift drum-tambor-manual1-.jpg   Shift drum-tambor-manual.jpg   Shift drum-estrela-.jpg  
Xinasa is offline  
February 11th, 2021, 05:41 AM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,539
Thanks: 619

I Ride: Husaberg FE501e 2003
dot at 3 o' clock.
stand engine vertically
spin input shaft one way
spin output shaft the other way
you are in neutral
now fit the star with the neutral and 'wheel' together.

Simple

it isn't difficult.

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
drum, shift



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is it a shift drum? etcbrown Mechanical 9 March 24th, 2012 12:57 AM
501FE (-96) shift drum question! Jocke76 Mechanical 2 June 26th, 2011 01:41 PM
how do i make shift drum pins stay on its place? Dukkinen Mechanical 4 May 27th, 2011 04:16 PM
Is this a problem (shift drum) ElSnorro Mechanical 7 September 18th, 2009 05:23 AM
Shift drum xristos Mechanical 3 November 17th, 2007 12:15 PM


Facebook Twitter Google+ RSS Feed