Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs

LinkBack Thread Tools Display Modes
October 6th, 2020, 05:43 PM   #11
Senior Member
Rainerio's Avatar
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 1,155
Thanks: 264

I Ride: 8 Berg’s 2005-2011 3 Husky’s 1986&7 2021 TE300 2009 Buell & 2006 Ducati
If you don’t have one put in a fuel sock at tank filler neck. The cleaner the fuel the better. Also not a bad idea to use injector cleaner once and awhile. Your post reminded Me I should replace the spark plugs on most of my bikes 9 years with the same plug

Last edited by Rainerio; October 6th, 2020 at 05:46 PM.
Rainerio is offline  
October 6th, 2020, 07:04 PM   #12
Junior Member
Joined: Sep 2006
From: Henderson NV

Posts: 23
Thanks: 0

I Ride: Huskies, KTMs, Berg, and Kaws
You can plug the injector into the electrical connector. Use a few sections of vac hoses and a connector. Slide it over the injector feed can of carb cleaner. Unplug your fuel pump. Have someone crank the bike while you are spraying the carb cleaner. Have the injector laying in a towel. Be surprised the stuff that comes out of the injector.
superberg1 is offline  
October 7th, 2020, 04:40 PM   #13
Joined: Mar 2013
From: NY

Posts: 94
Thanks: 8

I Ride: 2010 FX450 2011 KTM 250XC
Do you get any flame outs if so do the very simple carbon clean off from the spark plug boot lug . Check it first if it reads 5k ohms it’s good if not clean it I posted on the first page
cambo is offline  

  Husaberg Forum > Mechanical and Technical > Mechanical

2010, 390, stalling

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Husaberg 450 stalling Voycie Husaberg 2 February 19th, 2015 11:02 PM
Stalling help. MrX Mechanical 16 April 16th, 2013 12:32 AM
nothing but stalling ............HELP Braddenning Fuel 1 November 16th, 2012 07:32 AM
390 stalling a lot ThumpDrunk Husaberg 4 January 3rd, 2011 05:02 AM
Stalling BelgiqueBasterd Husaberg 10 November 3rd, 2009 04:29 PM

Facebook Twitter Google+ RSS Feed