Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
September 6th, 2020, 10:33 AM   #1
Junior Member
 
97husa600's Avatar
 
Joined: Jun 2020
From: ohio

Posts: 23
Thanks: 1

I Ride: KTM300mxc, lowrider custom Harley, Husaburg fe600e
fe600 engine

I found a motor but it's a older one, it has a screw on oil filter cover so it might be 90-96 ? does any one know. I have a 97 with a oil pump and this one does not, will the crank shaft work in my motor ?

Brian
97husa600 is offline  
 
September 7th, 2020, 04:40 PM   #2
Junior Member
 
97husa600's Avatar
 
Joined: Jun 2020
From: ohio

Posts: 23
Thanks: 1

I Ride: KTM300mxc, lowrider custom Harley, Husaburg fe600e
I looking for a counter balance and the gears for the starter. everything is missing out of mine. Anybody have these parts for a 97 fe600e
97husa600 is offline  
September 7th, 2020, 10:30 PM   #3
Junior Member
 
Joined: Sep 2020
From: Finland

Posts: 4
Thanks: 0

I Ride: FE650 2004
Originally Posted by 97husa600 View Post
I looking for a counter balance and the gears for the starter. everything is missing out of mine. Anybody have these parts for a 97 fe600e
Have you check Taffy's inventory?
Kullimaakari is offline  
September 8th, 2020, 01:19 AM   #4
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,280
Thanks: 541

I Ride: Husaberg FE501e 2003
I have 2000 gear for the side of the crank (would fit). I have a 400 balancer. I have the sprague bearing. I have the inner sprague gear or the outer, can't recall? I have battery boxes, solenoids, HT leads? the old girls need a 2 foot HT cable to the starter!

thing is, people took this stuff off. some kept it, sadly, many threw it.

Taffy
Taffy is offline  
September 8th, 2020, 08:35 AM   #5
Junior Member
 
97husa600's Avatar
 
Joined: Jun 2020
From: ohio

Posts: 23
Thanks: 1

I Ride: KTM300mxc, lowrider custom Harley, Husaburg fe600e
Taffy,

What do you need for what you got there,

I'm not real good with this site yet, is there a was to do private messages ?

Brian
97husa600 is offline  
September 8th, 2020, 08:58 AM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,280
Thanks: 541

I Ride: Husaberg FE501e 2003
just visit Taffmeisters and message me there. but I'm finishing right now (check the time) so you need to do it first thing in your morning.

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
engine, fe600



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Engine service questions 1994 FE600 Khristi Mechanical 32 May 28th, 2017 01:35 PM
FE600 old engine dimensions smrco Husaberg 0 March 1st, 2016 08:19 AM
'99 FE600 - What should I be looking for? BC_North Husaberg 6 November 20th, 2008 09:27 AM
best oil for my FE600 e 98 spanishman Mechanical 17 October 9th, 2008 10:03 AM
Fe600 motofreakuk Mechanical 2 March 11th, 2007 11:51 AM


Facebook Twitter Google+ RSS Feed