Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
June 11th, 2020, 01:08 PM   #1
Junior Member
 
Joined: Jul 2019
From: Finland

Posts: 9
Thanks: 0

I Ride: Husaberg FE550e/6 2006
Part identification

Hi!
Rebuild on finish line but here is a one part I do not remember what it is or where it belongs. I don't see it even in photos which I've taken. On top of that filled tube reads do not *at (assuming do not eat etc cant see surely because it has worn off) and there isn't any holes through it so just complete rubber. The other end is hard rubber and the other end is slightly flexible. I did some research and cant find it neither from repair manual nor in explosion images such as fowlersparts images. I'm not even 100% sure its from Husaberg fe550 -06 that I've been working.
Attached Thumbnails
Part identification-20200611_231934.jpg  
Okku12 is offline  
 
June 11th, 2020, 11:09 PM   #2
Senior Member
 
Joined: Nov 2007
From: Sweden Olofstrom

Posts: 396
Thanks: 19

I Ride: Husaberg FE 400 00, Husaberg Fe450 07, Husaberg FC 600 -99, Yamaha FJ1200 -86 Yamaha RD350 -84
Looks like swingarm bearing.
Jampe
jampe is offline  
June 11th, 2020, 11:54 PM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,064
Thanks: 503

I Ride: Husaberg FE501e 2003
Jampe

looks like his mates have been taking the piss out of him!

it's amazing what a bit of old washing machine can do.....

Okku, one of your mates is "taking the piss" out of you!!

Taffy
Taffy is offline  
June 12th, 2020, 01:16 AM   #4
Junior Member
 
Joined: Jul 2019
From: Finland

Posts: 9
Thanks: 0

I Ride: Husaberg FE550e/6 2006
So it originally goes nowhere and I can throw that into a trashbin?
Okku12 is offline  
June 12th, 2020, 04:23 AM   #5
Senior Member
 
Joined: Nov 2007
From: Sweden Olofstrom

Posts: 396
Thanks: 19

I Ride: Husaberg FE 400 00, Husaberg Fe450 07, Husaberg FC 600 -99, Yamaha FJ1200 -86 Yamaha RD350 -84
What size is it?
jampe is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
identification, part



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Piston identification webmonstro Mechanical 2 August 15th, 2016 01:40 PM
suspension identification klaas Suspension 1 April 28th, 2009 09:22 AM
the sem cdi identification scrapveiw Electrical 11 April 19th, 2008 12:22 AM
husa identification sirsumm Husaberg 3 May 6th, 2006 06:38 AM
Carburetor identification doctorcorey Fuel 7 November 6th, 2005 08:52 AM


Facebook Twitter Google+ RSS Feed