Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
May 21st, 2020, 03:57 PM   #1
Junior Member
 
Joined: Aug 2018
From: 17972

Posts: 12
Thanks: 5

I Ride:
FE 570 Cam Wear thoughts

Edit: Got my answer from Taffmeister re: the cam wear. But I'll leave all this up just in case. He stated it's fine to use.

After some disassembling I discovered I had a broken intake valve (right if sitting on bike) and a beat up shim laying in the head. But no other damage so far including the piston.

The cam has some wear on it though. Can't feel it with I run my nail or finger over it but it's a little concerning. Is this normal wear or do I have another issue? Few friends are suggesting an oiling issue. If it an oiling issue it more likely a clogged passage or a pump?

Here are the pix of the cams and a few other items.

Thanks!








Last edited by Sal Khan; May 22nd, 2020 at 01:04 AM.
Sal Khan is offline  
 
May 22nd, 2020, 12:56 PM   #2
Junior Member
 
Joined: Sep 2018
From: Italia

Posts: 24
Thanks: 1

I Ride:
Cam wear: it depends on how many hours it has, if it is 300 then it is normal for it to be so.
For the lubrication problem, you can start the engine with the start button and see if the oil flows abundantly from the lubrication holes

Last edited by Alfy; May 22nd, 2020 at 12:59 PM.
Alfy is offline  
May 22nd, 2020, 06:09 PM   #3
Junior Member
 
Joined: Aug 2018
From: 17972

Posts: 12
Thanks: 5

I Ride:
Originally Posted by Alfy View Post
Cam wear: it depends on how many hours it has, if it is 300 then it is normal for it to be so.
For the lubrication problem, you can start the engine with the start button and see if the oil flows abundantly from the lubrication holes
Yeah if there's any part that has me concerned it's the oiling so that's a good call. Otherwise parts are ordered, I'll torque everything down, triple check the valve clearance and see how she runs!

I should've checked the clearances initially before I rode it after I bought it since it was used. That falls squarely on me.
Sal Khan is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
570, cam, thoughts, valve, wear



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Some Thoughts FE350 Husaberg 4 January 21st, 2016 09:16 AM
G2 Throttle Cam - Thoughts? mikegcoleman Tech 9 September 23rd, 2010 04:14 AM
Thoughts about a 98 FE501 alex211 Husaberg 1 April 2nd, 2010 09:43 AM
Your Thoughts? kez Electrical 5 November 29th, 2005 06:10 PM
Thoughts??? kez Husaberg 9 October 15th, 2004 09:17 AM


Facebook Twitter Google+ RSS Feed