Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
May 10th, 2020, 11:03 AM   #1
Junior Member
 
Joined: Mar 2018
From: Maine

Posts: 8
Thanks: 0

I Ride:
hardware left over from engine assembly

2008 FE 550

Can anyone verify where the hardware in the two pictures belongs? I've just recently finished assembling the engine after it being apart for quite some time and cannont exactly remember where these pieces of hardware belong. I did follow the instruction manual very closely. (hopefully not inside the engine??!)

Thank you for anyone that recognizes

https://imgur.com/gallery/0KffaY1

https://imgur.com/gallery/0KffaY1
Inhumaine is offline  
 
May 10th, 2020, 01:13 PM   #2
Junior Member
 
Joined: Mar 2018
From: Maine

Posts: 8
Thanks: 0

I Ride:
the stepped washer goes on the kick-starter, figured that much out so far.
Inhumaine is offline  
May 11th, 2020, 12:51 AM   #3
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 16,166
Thanks: 523

I Ride: Husaberg FE501e 2003
the thick one also was an early kickstart washer but you can't fit both. the O rings look like kickstart seal replacement O rings. swop out the seal for the O ring because it is better.

no idea the platic washer or in the other photo the strange allen screw and washers.

are you sure your best mate didn't visit? ....its what mates are for....

laid them on the washing machine and they vibrated off during the spin cycle into your box?

Taffy
Taffy is offline  
May 11th, 2020, 07:38 AM   #4
Junior Member
 
Joined: Mar 2018
From: Maine

Posts: 8
Thanks: 0

I Ride:
Hahahaha you could be right!!! Been sitting strewn about my work bench for some time now between tear-down and rebuild... thank you for your time taffy. Cheers... ill put the engine back on the bike tonight.
Inhumaine is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
assembly, engine, hardware, left



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to rebuild/assembly a 2004 fs650 engine Trivette Mechanical 2 October 9th, 2018 06:14 AM
2005 FE450 engine noise - left side? Piet Mechanical 7 April 5th, 2018 01:33 AM
Want To Buy: 70 Degree subframe fuel tank hardware screnshaw400 Want To Buy 3 March 16th, 2016 06:31 PM
engine oil leaking out screw hole on left side cover carlito8724 Mechanical 2 November 1st, 2010 04:13 PM
Whining noise on left side of engine? Zorrobazz Mechanical 5 September 9th, 2006 03:30 AM


Facebook Twitter Google+ RSS Feed