Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
March 23rd, 2020, 02:09 PM   #1
Member
 
Joined: Jan 2017
From: Sweden - Sjömarken

Posts: 62
Thanks: 12

I Ride: Husaberg FE600 1994, Yamaha FZS1000, Beta Tr33
Gear/cable driven speedo shows wrong speed

I have a 2002 650 FSe with the original speed/odo driven by a gear on the front wheel spindle and a cable. The speedo has both mph and km/h but shows too low speed. At estimated 70 km/h in traffic it shows about 40 km/h.

At first I thought the drive gear was replaced with one for a 21” wheel but thinking about it again I realize it would then show too much and not too little as a 17” wheel makes more rpm at the same speed compared to a 21”.

Any thoughts?

Of course I know the option to fit a vapor magneto speedo or similar but I rather fix the original one if possible.

Cheers
Khristi is offline  
 
March 24th, 2020, 02:32 AM   #2
Senior Member
 
Rainerio's Avatar
 
Joined: Jun 2013
From: San Francisco CA. USA

Posts: 1,012
Thanks: 247

I Ride: 8 Berg’s 2005-2011 2 Husky’s 1986&7 2009 Buell & 2006 Ducati
Maybe the Speedo is off a FE ? Guessing
Rainerio is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
driven, gear or cable, shows, speed, speedo, wrong



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
fe600 speedo cable 2000 model Swampberg Husaberg 2 December 28th, 2010 02:01 PM
speedo cable mick1hussy Tech 1 November 9th, 2008 02:19 PM
Wheel Speed sensor cable freema Electrical 1 April 4th, 2007 12:56 PM
Electronic speedo cable ferret Tech 5 November 20th, 2006 07:35 PM
gear driven Berg dsducati Mechanical 5 March 9th, 2006 04:48 PM


Facebook Twitter Google+ RSS Feed