Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
February 17th, 2020, 11:01 AM   #1
Member
 
Joined: Aug 2018
From: Newport Beach, CA

Posts: 47
Thanks: 8

I Ride: FE650e, Vrod, K1600GTLe
Looking For A Recommendation For My Chain Roller Replacement

Can someone make a recommendation for a chain roller replacement (part number 120 056-01) for my 2002 Husaberg FE650e. I checked with the local KTM dealer and he could not find the part number or my bike. I found plenty online but without measurements I cannot make sure it will fit. Seems simple enough but I have said that before.
eplanto is offline  
 
February 21st, 2020, 07:24 AM   #2
Member
 
mars's Avatar
 
Joined: Jun 2004
From: denton texas

Posts: 72
Thanks: 6

I Ride: 2010 KTM250SX, 2001 Husaberg FC550
Taffy web (taffmeisters.co.uk) site has a roller kit that maybe the correct replacement, PN 100247. I have not ordered one in the past but plan to soon.

Mars
Husaberg FC550 2001
KTM 250SX 2010
mars is offline  
February 21st, 2020, 02:10 PM   #3
Member
 
mars's Avatar
 
Joined: Jun 2004
From: denton texas

Posts: 72
Thanks: 6

I Ride: 2010 KTM250SX, 2001 Husaberg FC550
If someone knows the cross-reference numbers, then possible the 2008 rollers 38mm may work on the 2001-2003 frames. If you go to Rockymountainatvmc.com they have been able to still parts for my Husaberg FC550 2001, I use the 2008 FC550 motor or chassis. Keep in mind there are parts that are not interchangeable between the 2001-03 to 2004-08s.
I was using last year Motosport.com but sometime last year they dropped almost all part on Husaberg 2008s and lower, so now I get my KTM and Husaberg parts from Rocky Mountain, Taffy and Motoxotica.

Mars
Husaberg FC550 2001
KTM 250SX 2010
mars is offline  
February 21st, 2020, 03:13 PM   #4
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 567
Thanks: 267

I Ride: when I can which isn't often enough. FX450, FE570
If you determine the size...

https://www.aliexpress.com/wholesale...m+chain+roller
Alan is offline  
February 21st, 2020, 07:17 PM   #5
Junior Member
 
Joined: Jun 2019
From: california

Posts: 11
Thanks: 0

I Ride: 2001 FE650, YZFR1, TRX250R
FE650 Cam Chain

i just received a new chain, cam sprocket, tensioner, and blade from Taffy. this is the chain box.

make sure you mark the crank gear and balance gear!!!! on mine the marks are missing......

2001 FE650
Attached Thumbnails
Looking For A Recommendation For My Chain Roller Replacement-dlto5228.jpg   Looking For A Recommendation For My Chain Roller Replacement-img_2109.jpg  
willfe650 is offline  
February 25th, 2020, 04:04 PM   #6
Member
 
Joined: Aug 2018
From: Newport Beach, CA

Posts: 47
Thanks: 8

I Ride: FE650e, Vrod, K1600GTLe
I went to Cycle Gear and they had a listing for all Husabergs. The width is not quite right but with a few washers it should work fine.

Now I need a chain guard for my swing arm (swingarm protection PN 120 152-03).

Last edited by eplanto; February 25th, 2020 at 04:07 PM.
eplanto is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
chain, recommendation, replacement, roller



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Upper / battery mounted chain roller on 08 FE 550 canadius Mechanical 9 October 20th, 2017 12:42 AM
Cam Chain Replacement xbakerbob Husaberg 4 June 3rd, 2012 07:51 PM
Cam chain replacement how-to? (FE550) ballbag Mechanical 5 April 20th, 2012 07:45 AM
Cam chain replacement cost 2000fc501rider Mechanical 1 March 20th, 2007 12:13 AM
Cam chain replacement LeFrog Mechanical 12 February 16th, 2007 08:53 PM


Facebook Twitter Google+ RSS Feed