Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
December 20th, 2019, 01:55 AM   #1
Senior Member
 
Joined: May 2003
From: East Riding of Yorkshire, UK

Posts: 103
Thanks: 4

I Ride: '09 FE450E, Husqvarna Nuda 900R
Timing chain tensioner for '09 450 sloper

Had this FE450 for a month or so with 220 hours on it, and on startup, there is camchain slap that takes a minute or so to clear whilst the auto hydraulic adjuster pumps up. I'm told a manual adjuster is the way to go? If so, where can I get one?
spiney is offline  
 
December 20th, 2019, 03:20 AM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,842
Thanks: 470

I Ride: Husaberg FE501e 2003
why worry? if you think it could up-a-click on the tensioner then all i did was undo the two outside bolts holding the CCT in by about 1 turn of each bolt. with a thread pitch of about .75mm this allowed the tensioner to click on one click.

it just has a job adjusting sometimes. I am not a fan of the manual tensioner because; the lunatics are in charge of the asylum!!!!!

as a Yorkshireman I'd stick to the Yorkshire expression; "i trust (just) me and thee". (To yanks; I trust me and (also just) me)

cheers

Taffy
Taffy is offline  
December 20th, 2019, 04:44 AM   #3
Member
 
astromarn's Avatar
 
Joined: Sep 2016
From: Sweden

Posts: 34
Thanks: 5

I Ride: Husaberg FE650 -01 Husaberg fe450 -11
Hello hade same on my 450 - 11
Im buy a dirty tricks chain tensioner and The problem is gone
It is half automatic
astromarn is offline  
December 20th, 2019, 04:51 AM   #4
Member
 
astromarn's Avatar
 
Joined: Sep 2016
From: Sweden

Posts: 34
Thanks: 5

I Ride: Husaberg FE650 -01 Husaberg fe450 -11
Originally Posted by Taffy View Post
why worry? if you think it could up-a-click on the tensioner then all i did was undo the two outside bolts holding the CCT in by about 1 turn of each bolt. with a thread pitch of about .75mm this allowed the tensioner to click on one click.

it just has a job adjusting sometimes. I am not a fan of the manual tensioner because; the lunatics are in charge of the asylum!!!!!

as a Yorkshireman I'd stick to the Yorkshire expression; "i trust (just) me and thee". (To yanks; I trust me and (also just) me)

cheers

Taffy
Is NO clicks on The 70degree engine tensioner its hydralic original
Dirty tricks is clicks and hydralic
astromarn is offline  
December 20th, 2019, 04:55 AM   #5
Member
 
astromarn's Avatar
 
Joined: Sep 2016
From: Sweden

Posts: 34
Thanks: 5

I Ride: Husaberg FE650 -01 Husaberg fe450 -11
https://dirttricks.com/shop/chain-te...ain-tensioner/
astromarn is offline  
December 27th, 2019, 07:02 PM   #6
Senior Member
 
Alan's Avatar
 
Joined: Jul 2016
From: Australia, Beechworth, Vic.

Posts: 552
Thanks: 265

I Ride: when I can which isn't often enough. FX450, FE570
Buy the Dirttricks tensioner. Its the way we all have to go eventually.
Alan is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
450, chain, sloper, tensioner, timing



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
DJH timing chain tensioner.. Aido_570 Mechanical 4 February 27th, 2015 11:09 AM
Timing chain tensioner setup tumpelo Mechanical 0 June 1st, 2013 06:34 AM
Timing Chain Tensioner Fail Tamas Mechanical 9 November 29th, 2012 02:55 AM
Timing chain tensioner -09 Fourstrokeforce Mechanical 97 April 10th, 2009 09:29 PM
2002 timing chain and tensioner upgrade. BelgiqueBasterd Mechanical 1 November 12th, 2006 08:21 AM


Facebook Twitter Google+ RSS Feed