Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
April 27th, 2004, 07:35 AM   #1
Senior Member
 
Joined: Feb 2003
From: Wilder, ID USA

Posts: 224
Thanks: 0

I Ride:
replacing counter balancer bearing

OK, ive decided to keep my counterbalancer, but ive got a new bearing for it. how do you get this thing off, do i use a puller or what?
dave186 is offline  
 
April 27th, 2004, 09:35 AM   #2
Senior Member
 
Simon's Avatar
 
Joined: Jun 2001
From: Berkshire, England

Posts: 1,453
Thanks: 3

I Ride:
Hello Dave,

How do get what specifically off? The counter balancer assembly off the crank or the balancer bearing out of the balancer unit?

Neither should require a puller. Sometimes the balancer is a bit tight on the crank but just requires a little force and some tapping. The bearing requires the removal of the circlip and can then be tapped out too.

Cheers,
Simon
Simon is offline  
April 27th, 2004, 10:54 AM   #3
Senior Member
 
Joined: Feb 2003
From: Wilder, ID USA

Posts: 224
Thanks: 0

I Ride:
I figured it out, just took a couple screwdrivers and it pryed right off. i thought maybe it was pressed on or something. the workshop manual didnt say much of anything. the new and old bearings look totaly different. the new almost looks shielded.
dave186 is offline  
May 10th, 2004, 12:49 PM   #4
Senior Member
 
Joined: Sep 2002
From: Sweden

Posts: 323
Thanks: 3

I Ride:
Hours

How many hours has these bearing worked?

Does anyone know how long they work in the reality?
mikst is offline  
May 10th, 2004, 01:12 PM   #5
Senior Member
 
Joined: Feb 2003
From: Wilder, ID USA

Posts: 224
Thanks: 0

I Ride:
mine was still good when i replaced it. im just guessing but somewhere around 200 hours maybe?
dave186 is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
balancer, bearing, counter, replacing



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Counter balancer bearing (again) Huehnerhabicht Mechanical 1 May 20th, 2008 12:30 AM
counter-balancer bearing Taffy Mechanical 36 January 31st, 2008 03:34 AM
counter balancer bearing? jrs1cycle Mechanical 4 August 6th, 2007 07:43 PM
FE 501e '02 double bearing counter balancer Morrisberg Mechanical 4 June 16th, 2007 09:51 AM
Counter balancer bearing bpikeuk Mechanical 10 July 26th, 2006 09:25 AM


Facebook Twitter Google+ RSS Feed