Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
September 14th, 2019, 04:32 AM   #1
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 53
Thanks: 0

I Ride: (husa fe650e 2004)b12 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
Chatter noise

Iím positive the chatter noise is coming from my carb
Iíve stripped it down and can find a few potential suspects.
So...
Should the needle move at all in the slide??
Should slide have 4 identical wheels? One of mine is different to the other 3 and also comes away from the slide
Lastly,
Should the front part of the slide, that comes of, with the ĎMí on it, easily come away from the slide? I have a rubber seal but it doesnít seem to do much
Any help appreciated
Jayyyxxx11 is offline  
 
September 14th, 2019, 06:29 AM   #2
Senior Member
 
canolman's Avatar
 
Joined: Sep 2013
From: canolbarth cymru

Posts: 362
Thanks: 208

I Ride:
Chatter at idle? Is your tick over ok? One wheel is a different size. The carb body, plate or seal may be worn.
There used to be billet slide plates on Ebay a while ago. Parts for the Keihin 41mm if that's what you've got are on the Trevor Pope microfiche. You'll need to search for Husqvarna to find the Husaberg parts!

Last edited by canolman; September 14th, 2019 at 06:42 AM.
canolman is offline  
September 14th, 2019, 06:51 AM   #3
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 53
Thanks: 0

I Ride: (husa fe650e 2004)b12 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
Idle is fine, no chatter
Only occurs 1/4 to 1/2 throttle
No difference with clutch pulled in
Forgot about Trevor pope thanks
Jayyyxxx11 is offline  
September 23rd, 2019, 06:47 AM   #4
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 53
Thanks: 0

I Ride: (husa fe650e 2004)b12 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
Originally Posted by canolman View Post
Chatter at idle? Is your tick over ok? One wheel is a different size. The carb body, plate or seal may be worn.
There used to be billet slide plates on Ebay a while ago. Parts for the Keihin 41mm if that's what you've got are on the Trevor Pope microfiche. You'll need to search for Husqvarna to find the Husaberg parts!
do you mean billet vacuum relase plates?
Jayyyxxx11 is offline  
September 23rd, 2019, 07:10 AM   #5
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 53
Thanks: 0

I Ride: (husa fe650e 2004)b12 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
turns out the chirping noise which i described as chatter is the vacuum release so perfectly normal
Jayyyxxx11 is offline  
September 24th, 2019, 12:46 AM   #6
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,753
Thanks: 458

I Ride: Husaberg FE501e 2003
that plate just needs the lipped O ring renewing although normally the 'clucking' is normally heard at idle most clearly.

in stock here anyway. 101021 in the web shop.

Taffy
Taffy is offline  
September 25th, 2019, 08:51 AM   #7
Member
 
Joined: Oct 2018
From: Isle of Wight

Posts: 53
Thanks: 0

I Ride: (husa fe650e 2004)b12 sold z1000 gen 1 sold z1000 gen 2 sold vfr400 sold xr650r sold striple r sol
Originally Posted by Taffy View Post
that plate just needs the lipped O ring renewing although normally the 'clucking' is normally heard at idle most clearly.

in stock here anyway. 101021 in the web shop.

Taffy
Thanks taff

Iíve changed the seal but i can still move it back and forth in the carb
This canít be right
Jayyyxxx11 is offline  
September 26th, 2019, 12:03 AM   #8
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,753
Thanks: 458

I Ride: Husaberg FE501e 2003
afraid so, that is how they are. they are meant to flutter, just not mega loose.

don't forget that you must see 'M' and not 'W' when you put it back.

Taffy
Taffy is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
chatter, noise



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Noise? canolman Mechanical 2 May 27th, 2019 12:11 PM
chatter noise my bike is making, suggestions? *video* cua0 Mechanical 3 June 21st, 2012 10:32 PM
what is this noise? Taffy Mechanical 15 July 7th, 2010 03:39 AM
noise cwalkin Mechanical 8 December 29th, 2006 01:59 AM
top end noise husadaddy501 Mechanical 9 April 14th, 2006 01:25 AM


Facebook Twitter Google+ RSS Feed