Husaberg
Go Back   Husaberg Forum > Mechanical and Technical > Mechanical

Mechanical Mechanical Forum - spinning bits and gyrating bobs


Reply
 
LinkBack Thread Tools Display Modes
July 13th, 2019, 03:10 PM   #1
Junior Member
 
Joined: May 2019
From: Indiana

Posts: 14
Thanks: 1

I Ride: 95 Husaberg FE501
95 FE501 no first gear/transmission replacement?

Hey guys. I recently opened the side cover on my 95 FE501 after having some shifting issues and first gear being completely unusable since I purchased the bike. I found several gear teeth laying in the bottom of the pan. I知 figuring this is why first gear wasn稚 working.
I知 curious what models would have an interchangeable transmission gear system. You値l have to excuse my ignorance here, I知 just learning how to work on Dirt Bikes.
AnticaHall is offline  
 
July 13th, 2019, 11:58 PM   #2
Senior Member
 
Joined: Nov 2001
From: Ely, England

Posts: 15,701
Thanks: 451

I Ride: Husaberg FE501e 2003
count the teeth mate. count them on several gears if you like just to get a better picture.

as you work from left to right the gears go 1-5-3-4-6-2.

you haven't said which gear (input or output). if it is input you have stuffed the shaft. output, well you might get a gear but your problerm will be the selector worm will have also been tortured.

you want to put all new needle bearings, washers, "E3" washers and circlips in to give the gearbox the very best chance next time around. check the selector forks are true, check the selector claw isn't blunted on the sliding fork and base plate for the same. they blunt and then bind where they hit the selector pins.

cheers

Taffy
Taffy is offline  
July 14th, 2019, 12:52 PM   #3
Junior Member
 
Joined: May 2019
From: Indiana

Posts: 14
Thanks: 1

I Ride: 95 Husaberg FE501
Thanks Taffy,
I haven稚 pulled the whole unit out to see what is all missing yet.
I appreciate the info. I値l let you know what I find.
AnticaHall is offline  
Reply

  Husaberg Forum > Mechanical and Technical > Mechanical

Tags
fe501, gear or transmission, replacement



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
1999 FE501 Stator & Coil Replacement dave66 Electrical 15 January 4th, 2016 08:23 AM
HELP!!! 95 FE501 one way gear. Redneck Mechanical 4 September 13th, 2014 11:56 AM
transmission oil ? optimus87 Mechanical 3 July 29th, 2012 04:51 AM
Replacement gear/shift lever rubba Mechanical 5 August 13th, 2008 08:09 PM
Cam gear position vs main gear after kick mechanism change p_kerttu Mechanical 16 June 29th, 2007 09:22 AM


Facebook Twitter Google+ RSS Feed